With the popularization of the Internet, video chat and voice chat have gradually become important means for us to communicate with friends. However, when everyone is talking, if there is other noise mixed in with the voice, or the headset can hear your voice and the other party's voice at the same time, you will definitely feel very disappointed. At this time, don't blame your microphone, it is probably not its fault.
Many people like to mute the microphone in the volume control panel before using it.
Uncheck the item and turn the microphone volume to the maximum. In fact, this approach is problematic. Let's do a test to illustrate this point.
Recorder
" that comes with the Windows system to do a recording test. When speaking into the microphone, there is a waveform in the "Recorder", which means that the recording operation is realized.
Reference address:Echo Cancellation
microphone
Recorder
" that comes with the Windows system to do a recording test. When speaking into the microphone, there is a waveform in the "Recorder", which means that the recording operation is realized.
ears
is probably the harsh noise from the speakers or headphones. If you listen to the playback after recording, you will find that your voice overlaps.
"
icon to open the "Properties" interface in the "Options", then select "Recording" and confirm, then enter the "Recording Control" dialog box, where there is also a microphone option. Check the "Select" item in the "Microphone" column, and then you can use the volume control to adjust the microphone volume.
Finally, two additional points:
(1) If you do not see the "Microphone" option when you double-click the "Speaker" icon, you can open "Properties" in "Options", then select "Playback" and select "Microphone" in the list box at the bottom of the interface.
(2) If the other party still cannot hear you clearly after you turn up the volume of the microphone to the maximum, you can turn on the "microphone boost" of the microphone. The specific method is: open "Properties" in "Options", select "Recording" and confirm, then enter the "Recording Control" panel, click the "Advanced" button under the "Microphone" column in the panel, and select "1. Mic Boost" in the "Microphone Advanced Control" interface. On the premise of ensuring that the microphone is "healthy", through the above settings, your microphone will definitely be more dynamic.
Microphone pickup
The sound quality of the microphone will be different at different distances.
1: Close distance (5-10cm) - has a strong sense of reality and intimacy, the sound is clean and clear, suitable for singers with soft voices and pop singing.
2: Medium distance (10-20cm) The language is relaxed and clear, the music is clear and bright, and the voice is clean. It is suitable for popular and ethnic singers with long hair, and
hosts
with medium intonation
.
3: Long distance (20-30cm) The timbre is thick and full, with a strong amplitude and more overtones. It is suitable for singers who sing in the bel canto style. The singer has sufficient breath and a high level of corresponding skills.
Determine what distance can pick up better sound based on your needs.
"
icon to open the "Properties" interface in the "Options", then select "Recording" and confirm, then enter the "Recording Control" dialog box, where there is also a microphone option. Check the "Select" item in the "Microphone" column, and then you can use the volume control to adjust the microphone volume.
Finally, two additional points:
(1) If you do not see the "Microphone" option when you double-click the "Speaker" icon, you can open "Properties" in "Options", then select "Playback" and select "Microphone" in the list box at the bottom of the interface.
(2) If the other party still cannot hear you clearly after you turn up the volume of the microphone to the maximum, you can turn on the "microphone boost" of the microphone. The specific method is: open "Properties" in "Options", select "Recording" and confirm, then enter the "Recording Control" panel, click the "Advanced" button under the "Microphone" column in the panel, and select "1. Mic Boost" in the "Microphone Advanced Control" interface. On the premise of ensuring that the microphone is "healthy", through the above settings, your microphone will definitely be more dynamic.
Microphone pickup
The sound quality of the microphone will be different at different distances.
1: Close distance (5-10cm) - has a strong sense of reality and intimacy, the sound is clean and clear, suitable for singers with soft voices and pop singing.
2: Medium distance (10-20cm) The language is relaxed and clear, the music is clear and bright, and the voice is clean. It is suitable for popular and ethnic singers with long hair, and
hosts
with medium intonation
.
3: Long distance (20-30cm) The timbre is thick and full, with a strong amplitude and more overtones. It is suitable for singers who sing in the bel canto style. The singer has sufficient breath and a high level of corresponding skills.
Determine what distance can pick up better sound based on your needs.
Previous article:Microphone Positioning
Next article:Installation of grating scale
- Popular Resources
- Popular amplifiers
Latest sensor Articles
- Melexis launches ultra-low power automotive contactless micro-power switch chip
- Infineon's PASCO2V15 XENSIV PAS CO2 5V Sensor Now Available at Mouser for Accurate CO2 Level Measurement
- Milestone! SmartSens CMOS image sensor chip shipments exceed 100 million units in a single month!
- Taishi Micro released the ultra-high integration automotive touch chip TCAE10
- The first of its kind in the world: a high-spectral real-time imaging device with 100 channels and 1 million pixels independently developed by Chinese scientists
- Melexis Launches Breakthrough Arcminaxis™ Position Sensing Technology and Products for Robotic Joints
- ams and OSRAM held a roundtable forum at the China Development Center: Close to local customer needs, leading the new direction of the intelligent era
- Optimizing Vision System Power Consumption Using Wake-on-Motion
- Infineon Technologies Expands Leading REAL3™ Time-of-Flight Portfolio with New Automotive-Qualified Laser Driver IC
MoreSelected Circuit Diagrams
MorePopular Articles
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
MoreDaily News
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
Guess you like
- Why do smart water meters use disposable 17450 (or other models) disposable lithium batteries? Why not use rechargeable batteries?
- How do Wi-Fi antennas work? How do you test and evaluate the performance of Wi-Fi networks? (Part 2)
- 【Development and application based on NUCLEO-F746ZG motor】15. Mathematical model - voltage equation and electromagnetic torque equation
- 5G may bring major upgrades to mobile phones
- Playing with Zynq Serial 42——[ex61] Image Laplacian Sharpening Processing of OV5640 Camera
- Snake moving in a twisting motion
- Qorvo's leading RF solutions
- Shanghai Hangxin ACM32F070 development board + serial port
- I'm a newbie and would like to ask for the code of an electronic combination lock!
- Proteus simulation: Generate square wave, sine wave, sawtooth wave and triangle wave