How to develop an air quality monitor using a Cypress evaluation board and Sensirion sensors-EEWORLD

Collect

According to Digikey, Cypress and Sensirion recently collaborated to develop an IoT air quality monitoring example project that integrates the Cypress PSoC 6 processor with the Sensirion sensor to push sensor data to the cloud dashboard.

The project uses the CY8CKIT-062-WIFI-BT PSoC 6 evaluation board, which connects to the Sensirion sensor via I2C and uploads it to the cloud. Sensirion's SGP, SPS, and SHT sensors are used to measure VOC and CO2 gas concentrations, particulate matter concentrations, temperature, and humidity. The ThingsBoard open source IoT platform is used to display sensor data on the dashboard. All project details, instructions, and software are documented in the IoT Air Quality Monitoring Example Project that can be downloaded from GitHub. The demonstration software provided with the project should be compatible with most Cypress WICED SDK devices, and the configuration code needs to be adjusted to match the hardware.

Keywords：Cypress Sensirion Reference address：How to develop an air quality monitor using a Cypress evaluation board and Sensirion sensors

Previous article：IoT improves security, smart video doorbell AI
Next article：Education is at the forefront of change: VR/AR technology becomes a breakthrough point for reform

Recommended ReadingLatest update time:2024-11-16 11:26

Building Secure Automotive Systems with Secure Flash Storage

In modern automotive embedded systems, highly secure data storage is essential, especially in the face of increasingly sophisticated cyberattacks. This article walks designers through the steps to properly use flash memory. The need for safety and security in electronic embedded systems has never been greater. As ca

[Automotive Electronics]