Usually, when implementing the IAP function, two project codes need to be written when designing the firmware program. The first project program, namely the BOOT program, does not perform normal funct
[color=#1a1a1a][font=-apple-system, BlinkMacSystemFont, "][size=15px]I would like to ask you about the DSP28335 issue. Can I temporarily disable the epwm_isr interrupt in the program and then enable i
Share the information of a mini 51 MCU learning board, small and beautiful, with reference programs, schematics and other informationDownload address: https://pan.baidu.com/s/13WpA8914kdn6jU04JNR6jwEx
Rockchip RK3399 chip development board OrangePi 4 (16G) has 4G memory and 16G storage, integrated dual-band WiFi, Bluetooth 5.0, HDMI output, Gigabit network port, USB interface and other rich functio
See Figure 1,the C8051F58x_59x SMBus routine provided by the SiLabs development environment: F580_SMBus_EEPROM.c;An error occurred during compilation, see Figure 2.What's going on? Is there no test?I