FPGA Design Practice (Logic) is aimed at the vast number of FPGA/CPLD beginners. It explains FPGA/CPLD and related basic knowledge from scratch, and uses a motherboard-based learning kit that supports
In the case of mixed integer and analog systems, simulation can only simulate Verilog or analog. If the digital part has only output, it is OK, just edit the voltage source and import the waveform fil
[align=left][color=rgb(25, 25, 25)][font="]Our lives are full of technological products, such as televisions, refrigerators, computers, cars, solar street lights, etc. You have seen so many technologi
I have drawn a 4-layer board. Can I lay ground on all 4 layers?
From the top layer to the bottom layer, they are Signal1, GND, Power, and Signal2 respectively, but the power layer has a thick power li