Pattern Recognition Xuanping Cai from National University of Defense Technology : https://training.eeworld.com.cn/course/5214Pattern recognition is a subject of data processing and information analysi
[i=s]This post was last edited by zdzd23 on 2019-10-6 23:52[/i]First, the wiring: 3.3V, GND, SCL, SDA Predefined code:/*Chip address*/#define LSM6DSO_ADRESS 0XD6#define LIS2MDL_ADRESS 0X3C#define LIS2
There are two STM32 MCUs on the board. Due to design limitations, the two MCUs are going to use CAN communication, but I don't want to add interface chips such as TAJ1050. Can I directly connect the R
[i=s]This post was last edited by nich20xx on 2020-6-17 06:36[/i]1 Introduction
The STM32WL series is a well-designed SoC chip designed by ST for the Internet of Things, especially for the LPWAN field
I'm going to use the MP2307DN to make a 2A, 5V circuit. I found an old schematic and it's a proven circuit! It works, but when I opened the "datasheet", I found the circuit diagram was like this.
Ther