To simulate a design with Saber, you must let SaberSketch know which schematic is the top level in the design. Since Saber can only have one netlist when it is opened, you can only specify one top level schematic in SaberSketch. If the schematic does not contain a hierarchical design, SaberSketch will default to the top level schematic when it is opened. You can skip this step. Otherwise, you must use Design>Use>Design_name in SaberSketch to specify the top level schematic.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore