I just started learning to use Modelsim. I wrote a simple counting program and a corresponding test program, but I can't simulate the timing diagram. Please help me!!!
Below is the source code and tes
As shown in the figure, when there is no input, the diode range of the multimeter is used to measure the 8th and 5th pins of the optocoupler, and the display is 0.9v. Why is this? When there is no inp
I hardly used the Philips ceiling light, but it broke when I used it. I called 400 after two and a half years and they said there were no spare parts. It would be a pity to throw away such a big light
Kernel Basics
RT-Thread core architecture diagramAs can be seen from the figure above, the implementation of the RT-Thread real-time kernel includes: object management, thread management and scheduler
Below is my serial port program. I don't know where the setting is wrong. I can't debug it. I use TI's pad and don't have an external crystal oscillator.#include " msp430fr5739 .h"#define delayus(n) _