DM5403/DM7403 Quad 2-Input NAND Gates with Open-Collector Outputs:This device contains four independent gates each of whichperforms the logic NAND function. The open-collector outputsrequire external pull-up resistors for proper logical operation.
When we use ADC, we sometimes need to monitor the ADC value within a certain range. Traditional polling processing is often not timely enough. Adding two voltage comparators to the periphery increases
This design focuses on using a CAN transceiver to extend the I2C range from on-board to off-board through a transmission cable and then convert the signal back to I2C. This approach helps improve sign
Experiment name: Application of power amplifier in electrolysis device of sludge electric remediation technology
Purpose:
The one-step method removes and recovers Pb from urban sludge, striving to ach
Recently, the project department has taken on a new project that requires the performance indicators of the IC to meet industrial-grade requirements. Does anyone have any recommendations?
We are currently making a set of outdoor smart locks, which are anti-theft and have no obvious prying points. This means that it is a fully enclosed shell, which is also installed on a metal cabinet.