Traditional C6000 DSP software is compiled and debugged on a WINDOWS PC through CCS. After testing, the compiled executable file is burned into FLASH. By setting the DSP startup mode to start from FLA
[i=s] This post was last edited by qwqwqw2088 on 2019-2-11 14:23 Edit[/i] [size=4][color=#000000][backcolor=white] The development of new energy and electric vehicles will use lithium batteries with r
[i=s]This post was last edited by dcexpert on 2019-10-17 10:55[/i]In SAMR21, part of the flash space can be used to simulate EEPROM, which is called NVM (Non-Volatile Memory). Using EEPROM is simpler
On the ATmega4809 Curiosity Nano, the button uses PF6, which is also the RST pin and is set to GPIO mode by default. Because there is a 100K pull-up resistor R200 on PF6, there is no need to set the i
[align=left][b][font=微软雅黑][size=3]No way to get support in the middle of the night, time-consuming to return software to the factory for upgrading, too low efficiency of customer service communication