[i=s]This post was last edited by DWIN_IOT on 2018-12-10 16:09[/i] [align=left][size=14px]This article introduces the software and hardware connection instructions for the DWIN DGUSⅡ touch screen and
Cause of the problemThe prompt message indicates that there is no Verilog simulation license, indicating that the software usage license has not been obtained.Even if you use a non-free version of Mod
Principle of oscillometric blood pressure signal detection (a common method of measuring blood pressure)First, inflate the cuff, and the cuff blocks the blood flow signal in the blood vessel. When it
When using AD2S1210, I found that the front LDO, model SPX1117-5.0V, was very hot. I couldn't figure it out because the current would not be very large. The LDO input was 12V, and the power consumed w