CAD format conversion

CAD format converter, convert new and old versions.

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

Learn circuit simulation Multisim and circuit design Protel technology from scratch
"Learn Circuit Simulation Multisim and Circuit Design Protel Technology from Scratch" is written for readers to quickly master Multisim and Protel, the two most commonly used and popular powerful appl
nRF51822 Part 2
[i=s]This post was last edited by cruelfox on 2021-4-17 15:49[/i]　　The Vidonn wristband I scrapped last time has many components on the board, but few GPIOs. I can't use so many external things at the
C2000 CLA FAQ: Memory Access
33. Does the CLA have access to all memory on the device? The CLA can use specific blocks on the device.CLA Program Memory On Piccolo (2803x and 2806x), this is a 4k x 16 block, single cycle (no wait
Implementing the Internet of Things with Bluetooth 4.2
[backcolor=white][color=#000000] In many wireless IoT devices, such as wearable electronics and battery-powered or self-powered sensors, it is critical to keep power consumption to a minimum. Some of
Why does the voltage of C46 become normal after replacing a larger capacitor?
After mounting the chips according to the circuit diagram, the voltage at VCC3V3 is not 3.3V, but 4.6V. After C46 is replaced from 22pF to 330pF, the voltage at VCC3V3 is 3.3V (the required voltage is
I'd like to ask if anyone has this tutorial.
E-sports preparation experience
CH224K test QC2.0 protocol 9V+E-Mark function
[Qinheng Trial] Single-step simulation
MSP430G2553 beginner design experience sharing

Trending Downloads