A 12V model aircraft battery is needed to drive 6 7V servos. Each servo requires 1A of current to maintain, not including the stall current.
Do you have any chips to recommend?
The core function of the body control module (BCM) is to monitor input signals such as the high beam switch status and enable or disable power to the corresponding loads such as the high beam. The BCM
[i=s]This post was last edited by uuxz99 on 2020-10-3 21:08[/i]【AT-START-F403A Review】 Part 2: FreeRTOS system implements full printf function based on IAR environment clock configuration and serial p
[i=s]This post was last edited by Albert.G on 2021-4-17 14:20[/i]Before the troops move, the food and grass must go first.
[Review of Arteli Development Board AT32F421] - Data Collection
There is a lo
[2022 Digi-Key Innovation Design Competition] [Intelligent Garden Integrated Control System] TouchGFX displays Chinese menu
When I chose STM32L496G-DISCO as the main control, I wanted to learn TouchGF