The electric grid is changing at an accelerating pace. The falling cost of solar panels has led to a proliferation of solar power installations around the world.
The inverter is an integral part of a
CC26xx has a dedicated chip supply voltage test function.
Here’s how:
1. Add the following header file to the simpleBLEPeripheral.c file.
#include driverlib/aon_batmon.h2. Add where needed
//BAT Monit
[i=s]This post was last edited by jinglixixi on 2022-3-30 09:27[/i]On the AT-START-F425 development board, there are 3 LEDs and 1 user key, and its schematic diagram is shown in Figure 1.Figure 1 LED
**1. Topic** How to dynamically open the log of the Bluetooth kernel **2. Problem background** Product: Tina product such as scanning pen Hardware: V853 + XR829 Software: Tina linux4.9 The purpose is
The circuit diagram of this part is as shown in the figure. The signal generator PULSE generates a +4V square wave signal, and the driver IC1 converts it into a +18V square wave signal and outputs it