In the ESP32OpenMV project, the original plan was to use CP2102 as the serial-to-USB chip design, but when purchasing, I found that this previously cheap chip had become a bit expensive, so in order t
I am using the CC1310F128RSM board. When initializing rfeasylinkrx, the initialization fails. The problem is as follows;
#ifdef RFEASYLINKRX_ASYNC/* Reset the timeout flag */rxTimeoutFlag = false;/* S
Abstract : You must have seen a lot of balancing cars, such as the most famous one is the bicycle balancing car made by the wild iron man Zhihui . That thing is too advanced for ordinary people to mak
Recently, I tested an automotive component. The chip used was JTA1021, the Lin output was 100-170KHz, and the radiated emission exceeded the standard by about 12dB.
The current rectification methods a