SCI serial port communication in interrupt mode 1. Declare SCI\'s transmit and receive interrupt service routine interrupt void MySCIRXINTA_ISR(void); interrupt void MySCITXINTA_ISR(void); 2. Configure the pin EALLOW; GpioMuxRegs.GPFMUX.bit.SCITXDA_GPIOF4=1 //Configure the SCI asynchronous serial port to send and receive data GpioMuxRegs.GPFMUX.bit.SCIRXDA_GPIOF5=1; EDIS; 3. Initialize the SCIA register void InitSci(void) { /* One stop bit, no parity, ideal mode, 8-bit data*/ SciaRegs.SCICCR.all = 0x07;
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore