Passthru intermediate layer miniport driver source code under Windows2000/xp-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

I recently used a chip that is compatible with both RS232 and RS485, but I don't know which pins are A and B for RS485.
I recently used a chip that can be used for both RS232 and RS485, but I don't know which pins are A and B of RS485. I hope someone can give me some advice.
[ATmega4809 Curiosity Nano Review] Configuring GPIO using MCC
First create a project, then run MCC, you can see the following interface.Right click on PF5 to set the GPIO mode.Select Pin Module on the left to modify the name of the GPIO.Then in the Libraries in
Today at 10:30 AM Microchip Live | Manufacturing Logistics Challenges of Key Security Provisioning: Advantages of Discrete Secure Components
Do you want to learn how choosing a secure element can reduce project risk and save money? Come join Microchip in an online seminar to learn how provisioning cryptographic keys can significantly reduc
Multisim circuit simulation does not oscillate?
[i=s]This post was last edited by fengzenghao on 2021-4-17 06:10[/i]As shown in the picture above, is there something wrong with the settings?
In order to solve network congestion, what black technologies does Wi-Fi 6 use?
The real popularity of Wi-Fi began with the introduction of Wi-Fi 4 (802.11n) in 2008. It can be said that since then, Wi-Fi has truly become the most common way for home and corporate Internet access
[Atria AT32WB415 Review] 1. Unboxing, installation and use of AT32 IDE development environment (especially error resolution)
Please ask the experts about STM32, FSMC control LCD problem?
Made a JLINK OB and shared the production process and experience
Creating an embedded project using Rust
I bought another development board with the highest integration, no doubt about it.

Trending Downloads

Passthru intermediate layer miniport driver source code under Windows2000/xp

Document Introduction