-
First look at TMS320C5410
This year, the school opened a DSP course, so I started to enter the DSP field. The equipment provided by the school is the Beijing Baike Rongchuang experimental box RC-DSP-II+, which contains the C20
-
[Mill MYB-YT507 development board trial experience] + build QT development environment and test, the most detailed steps to solve all troubles
After the last article, we will enter our application article. There is still time for experience, so let's not waste time on compilation. Let's experience our QT development today. In fact, Allwinner
-
[Repost] Advantages and process of dry etching
Silicon wet etching Silicon etching is typically done with a mixture of nitrogen-containing substances and hydrofluoric acid in water. This ratio becomes an important factor in controlling the etching
-
Microphone noise problem
[backcolor=rgb(222, 240, 251)]In a small closed environment, the microphone audio is fuzzy after passing through the op amp; in an open environment, the sound picked up by the microphone is normal and
-
How to ensure IoT security
Security is of paramount importance in all IoT device design and deployment.Billy Meadow, President and CEO, CTO, and Jeff Kase, Chief Architect at LocatorX, share some insights into the current and f
- LTC2323-12 chip does not work
- A brief analysis of the power amplifier in RF chips
- 【ST NUCLEO-G071RB Review】_04_UART Experiment
- ELT8629 chip
- MicroPython driver for non-volatile memory