When you need to transplant the algorithm you have written to the DSP development board and run it well, what work needs to be done? The following is divided into two parts. The first part is transpla
I wrote a program for a matrix keyboard, but it doesn't work very well.Schematic diagram:Code:
//Initialize PA8 and PD2 as output ports and enable the clocks of these two ports//LED IO initialization
TE Connectivity (TE) Webinar Learning Center has carefully prepared a wealth of technical lectures and video training for you. It not only restores the TE booth at the large exhibition site, but also
The CH224 is so easy to use (this is really worth praising). After doing the initial test, I felt that there was nothing to test, so I started to draw the circuit directly. This time I plan to use the
An FIR filter (Figure 1) stores a series of n data cells, each delayed by one additional cycle. Typically, these data cells are called branches. Each branch is multiplied by a coefficient, and the res