After searching online, I couldn't seem to find any information about the STM32 microcontroller not running the critical code of the system.
The microcontroller I am using now is STM32L010RBT6. There
This is the circuit generated by the ADI analog filter wizard. The amplifier's IN+ is not directly connected to Ref, but is connected through R4A, R3A, R4B, and R3B "voltage divider"
What role do the
Features of the three new TMS320 DSP families
1. TMS320C2000 - the best DSP for control, which can replace the old 'C1X and 'C2X. Now there are two trends:
(1) C20X 16-bit fixed-point DSP, with a sp
1 System Overview
As shown in the figure, this is the principle block diagram of the entire video acquisition system. At the beginning of power-on, the FPGA needs to initialize the register configurat