In the previous article, we introduced the relevant performance after unpacking. In this article, we use two routines to complete the initial development test.First, we unzip the SDK. There are some c
Webinar: Thermal Monitoring and Protection : https://training.eeworld.com.cn/course/5285Thermal monitoring is a classic techniques used to enhance system efficiency while ensuring system safety and he
I designed a project, which is similar to the previous project. There are LDO33 and LDO120 inside, but the ripple of 3.3 and 1.2 measured by myself is very large. The filter circuits are the same and
## Preface: I made an SLCD screen when I was tinkering with GD32L233. I modified it and it ran on AT32F425. The board is actually quite simple. The board is as follows: ![SLCD board](https://s2.loli.n