Download>Category>IC Design and Manufacturing>MAX9483/4 Chinese data pdf

pdf

MAX9483/4 Chinese data pdf

2013-09-22
716.57KB
Points it Requires : 2

repReport

Document Introduction
You Might Like
Recommended Downloads

The MAX9483/MAX9484 are high-performance, multimode laser diode drivers (LDDs) designed for CD and DVD combination pickup heads. The drivers feature three input channels, an RF oscillator, and two precision current amplifier outputs to drive CD and DVD laser diodes. By selecting the write control signal and the input current in the input channels, the MAX9483/MAX9484 can support a variety of CD and DVD read/write standards, such as CD-R/RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD-RAM. The peak total output current is 400mA, and the current gain of each channel is 100. The oscillation frequency and output amplitude can be set using external resistors. The MAX9484 also adds an external resistor pin that allows the oscillation frequency of the two outputs to be set independently. In addition, the MAX9484 can accept the write control signal in low-voltage differential signaling (LVDS) mode or single-ended mode for reliable high-speed write operation. The MAX9483 is available in a 16-pin QSOP and a 4mm x 4mm, 16-pin thin QFN package. The MAX9484 is available in a 4mm x 4mm, 20-pin thin QFN package. Both devices are rated for operation over a 4.5V to 5.5V supply and a 0°C to +70°C temperature range. ________________________________ Applications CD-RW and DVD Combination Laser Diode Drivers: CD-R/RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD-RAM DVD Recorders High-Power, High-Speed Laser Writer Drivers

unfold

You Might Like

Uploader

: lamas

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

"Playing with the Board" + Replaying MicroPython on the STM32F7DISC (1)
[i=s]This post was last edited by dcexpert on 2020-2-16 21:06[/i]Because of the COVID-19, I have a rare opportunity to stay at home. I found the previous STM32F7DISC and re-ran micropython for your re
How to enable wireless triggering of devices via bootloading using a Bluetooth serial adapter
Bootloaders support field updates of product firmware. Bootloaders can update firmware using common communication interfaces such as UART, I2C, SPI, or USB, typically with a wired connection between t
USB TypeC training PPT materials from Tektronix Labs Open Day are here. Download for a limited time to get a gift (including training videos)
{:1_97:}[size=4]From now until April 13, download the USB training materials or recommended materials from Tektronix Labs Development Day and you will have a chance to win a 50-yuan JD card (35 copies
Power supply circuit guidance
The attached circuit has insufficient load capacity. When the output voltage exceeds 100ma, the output voltage drops seriously. Please give me some advice. In addition, the resistor R1 has been adjust
LIS25BA can record, but there is "interference"
The operating voltage of LIS25BA is 1.8V. With so many development boards available, it is really difficult to find a 1.8V debugging board. Because we need to use TMD communication, the common microco
TI chip strange labeling
Millions of 103 series MCU stocks are about to be released!!!
30 EMC standard circuits shared, it will be too late if you don’t save them now!
How to expand NorFLASH using IAR?
Analysis of the voltage following circuit of the operational amplifier

Trending Downloads

Trending ArticlesMore

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews

Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号京ICP备10001474号-1 电信业务审批[2006]字第258号函

京公网安备 11010802033920号

×