The 5 programming modes under Ajax are of great help in design

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

Multiplexer Problem
There are more than 300 data channels to select. Please recommend a multiple-select data selector with more than 16 channels.
CC2541 serial port 1 position 1 problem? ? ? ?
The serial port is not connected, what's going on? ? ? ? ? ? ? ? PERCFG = 0x00; //USART1 is position 1 P0SEL |= BV(4) | BV(5); //Configure P0.4 and P0.5 as peripherals, not GPIO P2SEL |= BV(6); //Func
How to analyze and design active filters---Thank you very much! ! !
Hello, fellow electronics colleagues! I have never been able to fully master the design of analog filters with op amps, and I usually just use simulation tools. I would like to ask two questions: How
【Ufan Learning】Learning Part 4: "Basic Routine 3 - Buzzer Control"
[i=s]This post was last edited by 1nnocet- on 2019-7-22 10:23[/i]This content is originally created by EEWORLD forum user 1nnocet- . If you want to reprint or use it for commercial purposes, you must
How to set device diagram symbols to be read-only in AD schematics
In the hierarchical schematic design of AD2018, for example, if the power supply schematic is regarded as a submodule, according to the method in Figure 1, the target schematic can be abstracted into
Graduated and sold various development boards and electronic products
AD installation component library video tutorial
Is it OK to use 74HC164 like this?
Share an open source architecture of ethercat-based on XMC4800
(Transfer) bluetooth abbreviation

Trending Downloads