I've been working on a commonly used DCDC circuit recently. How do I deal with the overheating?
Isn't the LM2576 capable of outputting 3A of current? Why is it generating a fever at 900ma?
When the ci
1. If you want to use NDK, the CCS project you create must be a project that runs sys/bios.2. If you want to see the network demo of 6678, the demo path is: C:\ti\mcsdk_2_01_02_06\examplesdk\helloWorl
TUSB9261 is a USB 3.0 to SATA interface bridge chip from TI. The related reference materials are as follows: During use, because the SPI flash needs to be programmed, it involves certain steps. Many p
Ask for advice:I am currently working on a 64-channel acquisition board. The input is first connected to a voltage follower (OPA4187), and then through a two-stage analog switch (MUX508), it is input
Even embedded lighting engineers can’t do this.
I used to play with stm32, and imported the header file and c file of the TMS320 library according to the stm32 routine.
But there seems to be no way to