The trigger level is just a reference voltage, but the actual waveform has jitter at the edge. The following figure is a screenshot of a normal rising edge trigger:The blue T line is the reference vol
1. Introduction
The previous article [ https://en.eeworld.com/bbs/thread-1191327-1-1.html ] briefly introduced the use of ST60 and tested the distance parameters. It was found that the angle and dista
Is there anyone who can completely shut down PT4115? I built the circuit according to the reference material, and the DIM voltage is less than 0.3V, but the current is still more than 500uA. The data
Development board introduction:
The PHYTEC development board is developed by PHYTEC based on the STM32MP1 processor . The STM32MP1 series processor integrates a dual-core Arm Cortex-A7, a single-core
Live Details: Beineng International's new glass breakage detection solutionLive Topic: Beineng International's new glass breakage detection solutionLive lecturer: Li RenqingExcerpt from the Live FAQ: