The most common ways to write SPI polarity and phase are CPOL and CPHA, but there are also some other ways to write them, which are briefly summarized as follows:SPI's CPOL indicates whether the SCLK
Engineers are constantly looking for the simplest solution to complex system design challenges. Consider the U-NII 1-8, 5, and 6 GHz solutions. In this article, we will review how best-in-class bandBo
[i=s]This post was last edited by damiaa on 2018-12-18 10:10[/i] [Development Kit for nRF52840] + Evaluation of Four Bluetooth Serial Port Transparent Transmission[b]Library Code:[/b] After comparativ
Collection plan (1)
TI C5000 DSP has the characteristics of low power consumption, high performance and low cost. Among them, TMS320VC5502 has a clock speed of up to 300M, can expand 2MB of sdram, has
Since the use of timer conflicts with serial communication, the reason should be that serial port 0 uses timer 1 as the clock. Therefore, after enabling timer 1 (timing time is 100us) according to the