Applications that require control of motors usually include some type of current sensing circuitry. The ability to sense the current through the motor can help designers make adjustments such as speed
I used the T0 timer to write the water lamp back and forth, but only one lamp is on and the water does not flow. I don’t know what the problem is. Can you help me analyze it and see where I went wrong
MATLAB provides several examples, such as:
F281x based board: c281x_adcpwmasynctestc281x_adcpwmasynctest
F280x/F2823x/F2833x based board: c280x_2833x_adcpwmasynctest
Piccolo F2802x/F2803x/F2806x based