How to control two registers with offset 0 and 1 at the same time in HPS? The my_first_hps_fgpa routine only gives the method of controlling the offset to 0. I don't know how to control multiple regis
Question 1: Connection parameter update issue when CC2640R2F BLE4.2 and Bluetooth 4.0 mobile phone are interconnected.The CC2640R2F development document states the following:
A BLE peripheral device c
I have been debugging DM8148 recently. According to the requirements, the data obtained by the camera needs to be sent to DSP for image processing and then sent to A8 for other processing (network sen
[i=s]This post was last edited by Mongoose on 2019-8-24 14:21[/i]background :
I1 and I2 are 4-20mA current sources, which flow through the load RL. A wire is drawn from RL to the comparator. The compa
Model:MQT-805
Basic description: MQT-805 is a remote monitoring terminal based on RS485, 10M/100M network port communication, supporting Modbus bus protocol, Modbus TCP protocol (dual network port), 2