The requirements are as follows:1. The IO port can directly drive the buzzer and motor;2. Only 7 IO ports are required;
3. About 5x5mm;4. Common programming methods. Sorryfor the inconvenience.I found
[align=left][size=3][color=#000000][backcolor=white]Problem description: During online debugging of F28004x, if CCS is used to reset the chip, the program will stop at 0x3FB02A and cannot continue to
Today I am testing STM32H743, mainly testing the reception of UART3 serial port, referring to ST company's routine material "UART communication on STM32 Microcontrollers using HAL" [code] /* USER CODE
The complete demonstration program uses the same program structure as V1.Full ProgramList of key documentsmain.py, the main program
common.py, common files
ef_xxx.py, effect files, currently including
[i=s]This post was last edited by wadeRen on 2022-1-27 10:37[/i] # [Article Navigation] [GD32L233C-START Review——01. Unboxing, Development Kit](https://en.eeworld.com/bbs/thread-1192154-1-1.html "GD32