In this example, the P1.1 port button is configured to trigger an interrupt on the falling edge. After entering the interrupt, the state of LED2 is changed, and then the Timer0 interrupt is entered to
[i=s] This post was last edited by Jiang Ziyatong on 2022-6-28 11:25[/i]In recent years, the development of personal smart ECG monitoring equipment has accelerated, and there are many types of wearabl
With the rapid development of wireless communication in my country, the technical requirements for wireless communication equipment are getting higher and higher. How to determine its performance indi
I just got familiar with Hetai MCU some time ago. This MCU cannot be simulated online and needs a special simulation chip. It can only be used to make small household appliances. Under my suggestion,