The MSP430G2553 used is AD10, which normally has 8 outputs, P1.0-P1.7 is A0-A7
There are seven registers,The reference voltage can be VCC or the internal reference voltage 1.5V or 2.5V
The reference c
@landeng1986
Infineon Position2Go Development Kit Review @1. Unboxing
Infineon Position2Go Development Kit Review @2. Official Tools
Infineon Position2Go Development Kit Review @3. Testing
Infineon Po
The circuit diagram is shown in Figure 1, and Figure 2 is the waveform on the sampling resistor R detected by a differential probe. The problem is as follows:
1. Which of the following methods is used
[i=s]This post was last edited by lbbook on 2019-12-23 21:43[/i]The previous article ( 1_AWR1843BOOST unboxing ) has briefly introduced the unboxing of AWR1843BOOST and made a simple comparison with I