PART NUMBER:
± 2.5g Tri-axis Analog
Accelerometer Specifications
KXTH9-2083
Rev. 3
Sep-2011
Product Description
The KXTH9-2083 is a Tri-axis, silicon micromachined
accelerometer with a full-scale output range of +/-2.5g (24.5
m/s/s). The sense element is fabricated using Kionix’s proprietary
plasma micromachining process technology. Acceleration sensing
is based on the principle of a differential capacitance arising from
acceleration-induced motion of the sense element, which further
utilizes common mode cancellation to decrease errors from
process variation, temperature, and environmental stress. The
sense element is hermetically sealed at the wafer level by bonding
a second silicon lid wafer to the device using a glass frit. A
separate ASIC device packaged with the sense element provides
signal conditioning and self-test. The accelerometer is delivered in
a 3 x 3 x 0.9mm Land Grid Array (LGA) plastic package operating
from a 1.8 – 3.6 V DC supply. The KXTH9 features a factory
programmable low pass filter.
There are 2 factory programmable modes of operation for the KXTH9:
Mode 00
– The PD pin must be
high
for normal operation and
low
for power shutdown.
Mode 01
– The PD pin must be
low
for normal operation and
high
for power shutdown.
The KXTH9-2083 is factory programmed to be in MODE 01.
36 Thornwood Dr. – Ithaca, NY 14850
tel: 607-257-1080 – fax:607-257-1146
www.kionix.com -
info@kionix.com
© 2010 Kionix – All Rights Reserved
453-2470-1102251332
Page 1 of 11
PART NUMBER:
± 2.5g Tri-axis Analog
Accelerometer Specifications
KXTH9-2083
Rev. 3
Sep-2011
Functional Diagram
X
Sensor
Y
Sensor
Charge
Amplifier
LPF
Z
Sensor
ST
3
Vdd
1
GND
9
Logic
MUX
7
Oscillator
Aux In
4
2
8
6
PD
S0 S1Vmux
36 Thornwood Dr. – Ithaca, NY 14850
tel: 607-257-1080 – fax:607-257-1146
www.kionix.com -
info@kionix.com
© 2010 Kionix – All Rights Reserved
453-2470-1102251332
Page 2 of 11
PART NUMBER:
± 2.5g Tri-axis Analog
Accelerometer Specifications
KXTH9-2083
Rev. 3
Sep-2011
Product Specifications
Table 1. Mechanical
(specifications are for operation at 2.5V and T = 25C unless stated otherwise)
Parameters
Operating Temperature Range
Zero-g Offset
Zero-g Offset Variation from RT over Temp.
Sensitivity
Sensitivity Variation from RT over Temp.
Offset Ratiometric Error (V
dd
= 2.5V ± 5%)
Sensitivity Ratiometric Error (V
dd
= 2.5V ± 5%)
Units
ºC
V
mg/ºC
mV/g
%/ºC
%
%
Min
-40
1.19
388
Typical
-
1.25
0.6
400
0.01 (xy)
0.04 (z)
0.3
0.6 (xy)
0.3 (z)
Max
85
1.31
412
Self Test Output change on Activation
g
1
1
0.5
1.5 (x)
1.4 (y)
1 (z)
3500 (xy)
1800 (z)
0.1
2
150
2
1.8
1.6
Mechanical Resonance (-3dB)
Non-Linearity
Cross Axis Sensitivity
Noise Density (on filter pins)
1
Hz
% of FS
%
g
/ √Hz
Notes:
1. Resonance as defined by the dampened mechanical sensor.
36 Thornwood Dr. – Ithaca, NY 14850
tel: 607-257-1080 – fax:607-257-1146
www.kionix.com -
info@kionix.com
© 2010 Kionix – All Rights Reserved
453-2470-1102251332
Page 3 of 11
PART NUMBER:
± 2.5g Tri-axis Analog
Accelerometer Specifications
KXTH9-2083
Rev. 3
Sep-2011
Table 2. Electrical
(specifications are for operation at 2.5V and T = 25C unless stated otherwise)
Parameters
Supply Voltage (V
dd
)
Current Consumption
Input Low Voltage
Input High Voltage
1
Power Up Time
2
Mux Switching Time
3
Bandwidth (-3dB)
Operating
Operating (full power)
Standby
Units
V
A
A
V
V
ms
µs
Hz
Min
1.8
150
Typical
2.5
350
5
Max
3.6
550
0.2 * V
dd
0.8 * V
dd
-
40
5*R
out
*C
50
-
5
60
Notes:
1. Power up time is determined by 5 times the RC time constant of the factory programmed or
user defined low pass filter.
2. Mux Switching Time is defined as a transition from 10% to 90% with a 10pF load.
3. Factory programmable to have a switched capacitor low pass filter at 2kHz, 1kHz, 500Hz,
100Hz, 50Hz, or no low pass filter. Optionally, the user can define with external capacitors.
Maximum defined by the frequency response of the sensors.
36 Thornwood Dr. – Ithaca, NY 14850
tel: 607-257-1080 – fax:607-257-1146
www.kionix.com -
info@kionix.com
© 2010 Kionix – All Rights Reserved
453-2470-1102251332
Page 4 of 11
PART NUMBER:
± 2.5g Tri-axis Analog
Accelerometer Specifications
KXTH9-2083
Rev. 3
Sep-2011
Table 3. Environmental
Parameters
Supply Voltage (V
dd
) Absolute Limits
Operating Temperature Range
Storage Temperature Range
Mech. Shock (powered and unpowered)
ESD
HBM
Units
V
ºC
ºC
g
V
Min
-0.3
-40
-55
-
-
Typical
-
-
-
-
-
Max
6.0
85
150
5000 for 0.5ms
10000 for 0.2ms
3000
Caution: ESD Sensitive and Mechanical Shock Sensitive Component, improper handling
can cause permanent damage to the device.
This product conforms to Directive 2002/95/EC of the European Parliament and of the Council of the
European Union (RoHS). Specifically, this product does not contain lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBB), or polybrominated diphenyl ethers (PBDE)
above the maximum concentration values (MCV) by weight in any of its homogenous materials.
Homogenous materials are "of uniform composition throughout."
HF
This product is halogen-free per IEC 61249-2-21. Specifically, the materials used in this product
contain a maximum total halogen content of 1500 ppm with less than 900-ppm bromine and less than
900-ppm chlorine.
Soldering
Soldering recommendations are available upon request or from
www.kionix.com.
36 Thornwood Dr. – Ithaca, NY 14850
tel: 607-257-1080 – fax:607-257-1146
www.kionix.com -
info@kionix.com
© 2010 Kionix – All Rights Reserved
453-2470-1102251332
Page 5 of 11
京公网安备 11010802033920号
EEWORLD
