ISP1563
Hi-Speed Universal Serial Bus PCI Host Controller
Rev. 01 — 14 July 2005
Product data sheet
1. General description
The ISP1563 is a Peripheral Component Interconnect (PCI)-based, single-chip Universal
Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller
Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI)
core, and four transceivers that are compliant with Hi-Speed USB and Original USB. The
functional parts of the ISP1563 are fully compliant with
Universal Serial Bus Specification
Rev. 2.0, Open Host Controller Interface Specification for USB Rev. 1.0a, Enhanced Host
Controller Interface Specification for Universal Serial Bus Rev. 1.0, PCI Local Bus
Specification Rev. 2.2,
and
PCI Bus Power Management Interface Specification Rev. 1.1.
The integrated high performance USB transceivers allow the ISP1563 to handle all
Hi-Speed USB transfer speed modes: high-speed (480 Mbit/s), full-speed (12 Mbit/s) and
low-speed (1.5 Mbit/s). The ISP1563 provides four downstream ports, allowing
simultaneous connection of USB devices at different speeds.
The ISP1563 provides downstream port status indicators, green and amber LEDs, to
allow user-rich messages of the Root Hub downstream ports status, without requiring
detailed port information in the internal registers.
The ISP1563 is fully compatible with various operating system drivers, such as Microsoft
Windows standard OHCI and EHCI drivers that are present in Windows XP,
Windows 2000 and Red Hat Linux.
The ISP1563 directly interfaces to any 32-bit, 33 MHz PCI bus. Its PCI pins can source
3.3 V. The PCI interface fully complies with
PCI Local Bus Specification Rev. 2.2.
The ISP1563 is ideally suited for use in Hi-Speed USB host-enabled motherboards,
Hi-Speed USB host PCI add-on card applications, mobile applications, and embedded
solutions.
To facilitate motherboard development, the ISP1563 can use the available 48 MHz clock
signal to reduce the total cost of a solution. To reduce Electro-Magnetic Interference
(EMI), however, it is recommended that the 12 MHz crystal is used in PCI add-on card
designs.
Philips Semiconductors
ISP1563
HS USB PCI Host Controller
2. Features
s
Complies with
Universal Serial Bus Specification Rev. 2.0
s
Supports data transfer at high-speed (480 Mbit/s), full-speed (12 Mbit/s) and
low-speed (1.5 Mbit/s)
s
Two Original USB OHCI cores comply with
Open Host Controller Interface
Specification for USB Rev. 1.0a
s
One Hi-Speed USB EHCI core complies with
Enhanced Host Controller Interface
Specification for Universal Serial Bus Rev. 1.0
s
Supports PCI 32-bit, 33 MHz interface compliant with
PCI Local Bus Specification
Rev. 2.2,
with support for D3
cold
standby and wake-up modes; all I/O pins are 3.3 V
standard
s
Compliant with
PCI Bus Power Management Interface Specification Rev. 1.1
for all
hosts (EHCI and OHCI), and supports all power states: D0, D1, D2, D3
hot
and D3
cold
s
Four downstream ports with support for downstream port indicator LEDs: amber and
green
s
Configurable two or four port root hubs
s
CLKRUN support for mobile applications, such as internal notebook design
s
Configurable subsystem ID and subsystem Vendor ID through external EEPROM
s
Digital and analog power separation for better EMI and Electro-Static Discharge (ESD)
protection
s
Supports hot Plug and Play and remote wake-up of peripherals
s
Supports individual power switching and individual overcurrent protection for
downstream ports
s
Supports partial dynamic port-routing capability for downstream ports that allows
sharing of the same physical downstream ports between the Original USB Host
Controller and the Hi-Speed USB Host Controller
s
Supports legacy PS/2 keyboard and mouse
s
Uses 12 MHz crystal oscillator to reduce system cost and EMI emissions
s
Supports dual power supply: PCI V
aux(3V3)
and V
CC
s
Operates at +3.3 V power supply input
s
Low power consumption
s
Full industrial operating temperature range from
−40 °C
to +85
°C
s
Full-scan design with high fault coverage (93 % to 95 %) ensures high quality
s
Available in LQFP128 package.
3. Applications
s
s
s
s
s
s
Digital consumer appliances
Notebook
PCI add-on card
PC motherboard
Set-Top Box (STB)
Web appliances.
9397 750 14224
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 — 14 July 2005
2 of 107
Philips Semiconductors
ISP1563
HS USB PCI Host Controller
4. Ordering information
Table 1:
Ordering information
Package
Name
ISP1563BM
LQFP128
Description
plastic low profile quad flat package; 128 leads; body 14
×
14
×
1.4 mm
Version
SOT420-1
Type number
9397 750 14224
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 — 14 July 2005
3 of 107
xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x
Product data sheet
Rev. 01 — 14 July 2005
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
9397 750 14224
5. Block diagram
Philips Semiconductors
SMI# SEL48M SCL
13
121
122
SDA
123
V
DDA_AUX
104, 111,
120, 128
LEGACY
KEYBOARD
AND MOUSE
SUPPORT
PME# 1
AD[31:0] 20, 22 to 25, 30 to 32, 36 to 41,
43, 44, 60 to 62, 65, 66, 68, 69,
32
71, 74, 75, 77 to 82
C/BE#[3:0]
33, 45,
PCI CORE
58, 72
REQ# 19
PCI MASTER
GNT#
18
IDSEL 34
PCI SLAVE
INTA# 14
FRAME# 46
DEVSEL# 49
IRDY# 47
CLKRUN# 52
PAR 57
PERR# 54
SERR# 55
TRDY# 48
STOP# 51
PCICLK
17
POR
CONFIGURATION FUNCTION 2
CONFIGURATION SPACE
3
4
8
9
7
IRQ1
IRQ12
KBIRQ1
MUIRQ12
A20OUT
GLOBAL CONTROL
ISP1563
VOLTAGE
REGULATOR
(V
aux
)
12
V
I(VAUX3V3)
32-bit, 33 MHz PCI bus
11, 85
6, 95
V
aux(1V8)
core
OHCI
(FUNCTION 0)
RAM
OHCI
(FUNCTION 1)
RAM
EHCI
(FUNCTION 2)
RAM
10, 27, 56, 73,
84, 98, 100, 102,
107, 109, 116,
118, 124, 126
PORT ROUTER
99
5
AUX1V8
V
CC(I/O)_AUX
RREF
SEL2PORTS
CONFIGURATION FUNCTION 0
CONFIGURATION FUNCTION 1
CORE RESET_N
GNDA
RST# 15
21, 35, 50,
V
CC(I/O)
67, 83
26
28, 53,
70
VOLTAGE
REGULATOR
V
I(VREG3V3)
V
CC
core
2, 16,
29, 42,
59, 76, 88
ATX1
ATX2
ORIGINAL
USB ATX
Hi-SPEED
USB ATX
ATX3
ORIGINAL
USB ATX
Hi-SPEED
USB ATX
ATX4
ORIGINAL
USB ATX
Hi-SPEED
USB ATX
GNDD
REG1V8
V
CC(I/O)
DETECT
XTAL1
XTAL2
86
87
004aaa510
ORIGINAL
USB ATX
Hi-SPEED
USB ATX
HS USB PCI Host Controller
XOSC
PLL
105 91 92 106 108 110
96 93 94 97 101 103
114 63 64 115 125 127
112 89 90 113 117 119
OC2_N
OC1_N
OC3_N
OC4_N
AMB2
AMB1
AMB3
AMB4
GRN1
GRN2
GRN3
GRN4
DM1 DP1
DM3 DP3
DM2 DP2
DM4 DP4
PWE1_N
PWE2_N
PWE3_N
PWE4_N
ISP1563
4 of 107
Fig 1. Block diagram.
Philips Semiconductors
ISP1563
HS USB PCI Host Controller
6. Pinning information
6.1 Pinning
128
97
96
1
ISP1563BM
32
33
64
65
004aaa511
Fig 2. Pin configuration.
6.2 Pin description
Table 2:
Symbol
[1]
PME#
Pin description
Pin
1
Type
O
Description
PCI Power Management Event; used by a device to request a
change in the device or system power state
PCI pad; 3.3 V signaling; open-drain
GNDD
IRQ1
2
3
-
O
digital ground
system keyboard interrupt; when not in use, pull-down to ground
through a 10 kΩ resistor
3.3 V output pad; 3 ns slew rate control; CMOS; open-drain
IRQ12
4
O
system mouse interrupt; when not in use, pull-down to ground
through a 10 kΩ resistor
3.3 V output pad; 3 ns slew rate control; CMOS; open-drain
SEL2PORTS 5
I
select two or four ports:
•
•
V
CC(I/O)_AUX
A20OUT
6
7
-
O
LOW: four ports selected
HIGH: two ports selected.
3.3 V input pad; push-pull; CMOS
3.3 V auxiliary supply voltage; used to power pads; add a 100 nF
decoupling capacitor
legacy gate 20 output; when not in use, pull-down to ground through
a 10 kΩ resistor
3.3 V output pad; 3 ns slew rate control; CMOS; open-drain
KBIRQ1
8
I
legacy keyboard interrupt input; when not in use, pull-down to ground
through a 10 kΩ resistor
[2]
3.3 V input pad; push-pull; CMOS
MUIRQ12
9
I
legacy mouse interrupt input; when not in use, pull-down to ground
through a 10 kΩ resistor
[2]
3.3 V input pad; push-pull; CMOS
GNDA
9397 750 14224
10
-
analog ground
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 01 — 14 July 2005
5 of 107
京公网安备 11010802033920号
EEWORLD
