Stepless speed regulation circuit using auxiliary power supply
Source: InternetPublisher:吃掉星星 Keywords: Stepless speed regulation power supply speed regulation circuit BSP Updated: 2020/06/16
The circuit is shown in Figure 3-171. In the figure, the auxiliary power supply is a single-phase AC power supply , and the output current is supplied to the balancing resistor R through the single-phase half-wave control bridge (
composed of diodes VD7, VD8 and thyristors vl, V2). , the trigger circuit of the thyristor is a full-
wave resistor-capacitor phase-shift bridge.
By adjusting the potentiometer RP, the trigger conduction angle of the thyristor can be changed, so that the motor can
be continuously adjusted within the range of 300 to 900r/min.
- Replace the GE LOGIQ a200 ultrasound measurement key with a self-made touch switch
- Motor automatic cycle control circuit
- JDB-LQ-TQ/2 motor full voltage starting circuit
- Simple phase failure protection circuit composed of intermediate relay
- Infrared blocking alarm device
- High-sensitivity and high-loudness burglar alarm circuit
- Practical electric curtain remote control device
- Guest room power automatic controller
- Automatic controller for electric iron
- A novel resonance demonstration device
- Set timing circuit when power is on
- Voice controlled flash LED light circuit diagram
- stuttering correction circuit
- Physiotherapy ventilator circuit
- Fish pond oxygenation reminder circuit
- Farmland drainage automatic control circuit
- Crabo oscillator circuit
- Common emitter-common base wideband amplifier circuit composed of F733 integrated amplifier
- common emitter amplifier circuit
- Power phase sequence display circuit
京公网安备 11010802033920号