GUB-GL0BLF-03-61R2-C-B datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> GUB-GL0BLF-03-61R2-C-B

GUB-GL0BLF-03-61R2-C-B: DescriptionArray/Network Resistor, Bussed, Thin Film, 0.1W, 61.2ohm, 0.25% +/-Tol, -25,25ppm/Cel, 5030,; CategoryPassive components The resistor; File Size493KB，3 Pages; ManufacturerTT Electronics plc; Websitehttp://www.ttelectronics.com/; Environmental Compliance

Download Datasheet Parametric View All

GUB-GL0BLF-03-61R2-C-B Overview

Array/Network Resistor, Bussed, Thin Film, 0.1W, 61.2ohm, 0.25% +/-Tol, -25,25ppm/Cel, 5030,

GUB-GL0BLF-03-61R2-C-B Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	795502751
package instruction	SMT, 5030
Reach Compliance Code	compliant
Country Of Origin	USA
ECCN code	EAR99
YTEOL	7.1
structure	Molded
JESD-609 code	e3
Network Type	Bussed
Number of terminals	20
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package height	2.667 mm
Package length	12.802 mm
Package form	SMT
Package width	7.544 mm
Rated power dissipation(P)	0.1 W
resistance	61.2 Ω
Resistor type	ARRAY/NETWORK RESISTOR
series	GUB
size code	5030
technology	THIN FILM
Temperature Coefficient	25 ppm/°C
Terminal surface	Matte Tin (Sn)
Tolerance	0.25%

Preview

Download Datasheet

View All

TaNFilm

Small Outline Surface

Mount Resistor Network

GUB Series

•

Thin ﬁlm on ceramic technology

0.220” and 0.300” sizes available

RoHS compliant version available

DESC 87012 and 87013 available

Standard JEDEC packages for automatic placement equipment

Compliant leads to

compensate for

thermal expansion

and contractions.

IRC Advanced Film Division

Ultra precision tantalum

nitride resistance element

on high purity alumina.

Rugged, molded

construction.

IRC’s TaNFilm®, Small Outline Integrated Circuit resistor networks are ideally suited for surface mounting.

The 0.05 inch lead spacing provides higher lead density, increased component count, lower installed resistor

cost, and better reliability. They are ideally suited for the latest surface mount assembly techniques, and each

lead can be 100% visually inspected. The compliant leads relieve thermal expansion and contraction stressed

created by soldering and temperature excursions.

The tantalum nitride film system provides precision tolerance, exceptional TCR tracking, and low noise.

TaNFilm® provides stability, high reliability, and long life characteristics. Testing has demonstrated performance

exceeding MIL-PRF-83401 characteristics H.

Electrical Data

GM Type

Resistance Range (Ω)

GL Type

Absolute Tolerance

Ratio Tolerance To R1

TCR (ppm/°C)

TCR Tracking To R1 (ppm°C)

Operating Temperature Range

Noise

Substrate

Custom circuits and special testing available.

Schem A: 10 to 200K

Schem B: 10 to 1000K

Schem A: 10 to 150K

Schem B: 10 to 75K

Available to ±0.1%

Available to ±0.05%

±25, ±50, ±100

±5

-55°C to +125°C

Less than -25 dB

High purity alumina substrate

General Note

IRC reserves the right to make changes in product speciﬁcation without notice or liability.

All information is subject to IRC’s own data and is considered accurate at time of going to print.

• 4222 South Staples Street • Corpus Christi Texas 78411 USA

Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com

A subsidiary of

TT electronics plc

GUB Series Issue November 2008 Sheet 1 of 3

Recommended Resources

Laptop memory power supply circuit (0.9-1.8V)

VMOS tube high-quality power amplifier circuit

AN7173NK power amplifier circuit diagram

Electronic transformer circuit

Electrical schematic diagram of M7130 horizontal axis giant table surface grinder

Staircase wave oscillator composed of sample/hold circuit

2020 Share my thoughts on Qian'an, a national healthy and civilized county-level city: 2020 Share my thoughts on Qian'an, a national healthy and civilized county-level city...; zxw1126 Talking

MOS tube drain ringing: MOS tube drain ringingQ6 was replaced with YJN02N10A, 100V2A MOS, and the inductor was replaced with 47uH (a certain brand prototype is 47uH).The load current requirement is ≤90ma, the output voltage ...; QWE4562009 Discrete Device

[Pre-register to win a multimeter and JD card] Prize live broadcast | ADI's latest switches and multiplexers, technical parameters, design...: Live content:Analog switches and multiplexers are core components of signal channels and are used in many fields such as industry, instrumentation, medical, consumer electronics, communications and au...; EEWORLD社区 Analog electronics

Awesome, liquid metal circuit printing, fast plate making, no need to wait anymore~: Guan Guan just saw a news article: Follow Meng Zhimo into the Harbin Institute of Technology's Liquid Metal Circuit Printing Innovation Practice Room - Electronic Engineering World (eeworld.com.cn)Har...; okhxyyo PCB Design

Current detection methods: Current detection methods1. DC detection usually uses a precision resistor in series in the circuit being detected. The MCU detects the current by detecting the voltage drop of the sampling resistor.2...; QWE4562009 Discrete Device

[CB5654 Intelligent Voice Development Board Review] Hardware Review: Thanks to WWWORLD, I received the Pingtouge voice development kit. The box packaging is super gorgeous. The true appearance of the Xuantie 803c processor is as follows:The core board of the developmen...; 杨左使 Domestic Chip Exchange

Channel doubling based on A/D converter IC stacking and parallel connection

1 Introduction A/D converter is a commonly used analog/digital converter in data acquisition. For intelligent instruments with detection functions, designers always hope to obtain more detection chan...[Details]
Tesla is also researching "pseudo lidar"

Recently, Andrej Karpathy, senior director of Tesla AI, revealed at a machine learning conference that he is also doing some research on pseudo-LiDAR technology. He believes that the gap between virt...[Details]
How to use a digital multimeter to measure and detect transistor pins

Digital multimeters are now very popular measurement tools. They are easy to use and accurate, and are loved by maintenance personnel and electronic enthusiasts. But some friends say that they are no...[Details]
How to measure non-intrusive devices?

　　Due to the needs of microwave engineering, most microwave RF components have female ports, while the ports of cable connectors are one female and one male. These microwave RF components cannot be di...[Details]
DS1302 Communication Timing Introduction

We have mentioned DS1302 before. It has three lines, namely CE, I/O and SCLK. CE is the enable line, SCLK is the clock line, and I/O is the data line. We have introduced SPI communication before. Hav...[Details]
Bourns launches new smallest self-resetting surface-mount miniature circuit breaker

Bourns® SW miniature thermal protector (TCO) devices are designed to provide over-temperature protection for low current applications and can be used as over-temperature sensors. November 16, 2023 ...[Details]
Servo motor encoder failure and repair What is AL

Servo motor encoder failure and repair AL is a professional topic involving motor control, fault diagnosis and repair technology. Servo Motor Encoder Overview The servo mot...[Details]
Simple and practical triode inverter circuit design

　　This is a household inverter power supply circuit diagram with excellent performance. The materials are easy to obtain and the output power is 150W. The design frequency of this circuit is about 30...[Details]
ARM9 study notes - assembly

There is an essential difference between the ARM series chips and the PC series (maybe my statement is not accurate) chips in instruction design. Each instruction in ARM is a reduced instructi...[Details]
STM32L151 ADC analog watchdog interrupt and overflow interrupt

Site conditions: 1. AD acquisition, DMA transmission; AD is set to single-channel continuous mode, DMA is set to single-shot mode. The upper threshold of the AD analog watchdog setting is less than t...[Details]
Sodium-ion battery industry chain forum records

The "Sodium Ion Industry Chain and Standards Development Forum" was held on November 29. After reading the minutes of the meeting, I made some excerpts. ▲Figure 1. Current industrialization progres...[Details]
51 MCU beginner practice: using DS1302 module and 1.44 inch TFT display to realize electronic clock

This week, we made the following two improvements based on the electronic clock we implemented last time (51 MCU beginner practice: using DS1302 module and LCD1602 display to realize electronic clock...[Details]
Comparison between Keil C51 and Standard C

One of the keys to learning C51 is to deeply understand and apply C51's extensions to standard ANSI C. This is because most of the extensions are directly targeted at the 8051 series CPU hardware. The...[Details]
Huawei Mate 20 Pro returns to the Android testing list?

Jiwei.com News (Text/Ai Meng) In recent days, the US's suppression of Huawei has been constantly reversed or reversed. Just after the SD Association, WiFi Alliance and Bluetooth Technology Alliance ...[Details]
LM4912 left and right dual channel amplifier circuit diagram

　　As shown in the figure, this is the LM4912 dual-channel amplifier circuit. The left and right channel audio signals are input into the 1st and 5th pins of the LM4912 respectively, and are output fr...[Details]

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components