Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[i=s]This post was last edited by zhang7309 on 2019-6-21 23:25[/i]Project Name: Indoor Environment Monitoring Terminal
1. Introduction:The indoor environment monitoring terminal can monitor the indoor...
I found this using the stm32f103c8t6 minimum system board. When the ADC is converting, the reading value is normal without the sensor plugged in, but when the sensor is plugged in, the data fluctuates...
I want to send MP3 through 433M wireless module, and the other end will send it to the microcontroller after receiving it. The microcontroller will decode and play it through the decoding chip. I don'...
In the first two sections, we discussed the most popular interfaces of T-BOX: PHY and CAN. In the following sections, I will introduce the power supply, which is mainly divided into Wide Vin BUCK, Low...
[i=s]This post was last edited by damiaa on 2021-5-16 19:36[/i]Disassemble the Xiyangyang Bluetooth speaker into eight pieces
I've been annoyed with this speaker for a long time because it stopped con...
LPC1768 has 4 timers, which can be used as interval timers, external capture inputs, and free-running timers. At least 2 of the 4 timers can be set as capture and match outputs, and timer 2 can be set...
Under the ARM architecture, the work after a TLB miss is mostly completed by hardware page table walk. Under special circumstances, the hardware page table walk can be turned off. At this time, the CP...[Details]
With the development of the economy and the improvement of living standards, people's living requirements have changed. In order to adapt to the new needs of housing, my country will build an intelli...[Details]
Below we mainly analyze the practical application of static routing technology. When a host application needs to send a data packet to a destination located on a different network, the router receives...[Details]
Exceptions are mainly divided into interrupts (such as IO ports, UART, etc.) and system exceptions (such as NMI, SYCTICK, etc.). Pay attention to the difference between interrupts and system exceptio...[Details]
First download the source package of ethtool.
The rest can be done with a few commands.
tar -xzf ethtool-3.15.tar.gz
cd ethtool-3.15
./configure --host=arm-linux CC=arm-none-linux-gnueabi-gcc ...[Details]
Interrupt The timer is the most basic functional device of the 51 single-chip microcomputer, and it is very important to master its programming method; #include reg51.h #include stdio.h unsigned...[Details]
1. Initialization Set up the interrupt source (so that it can send an interrupt signal) Set up the interrupt controller (so that it can send an interrupt signal to the CPU) Set the CPU master switch ...[Details]
introduction
Mineral resources are national strategic resources related to the national economy and people's livelihood. The safe mining of mineral resources is one of the fundamental foundati...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
Recently, Fudi Technology officially released the new generation of RF1 platform forward millimeter wave radar at BYD's global headquarters. It is reported that the RF1 platform successfully passed t...[Details]
The new year's Fortune Global 500 list has just been released. With the inclusion of Hong Kong, Macao and Taiwan, the number of Chinese companies on the list has unprecedentedly surpassed that of the...[Details]
Steer-by-wire can be divided into broad and narrow senses. In a broad sense, steer-by-wire refers to a steering system that controls the steering function by electrical signals, and does not necessar...[Details]
Everyone should be familiar with online gas detectors. In industrial production, they are generally used to detect the types of gases present in the environment to check whether the environment is sa...[Details]
In March, many new phones were released, ranging from entry-level to top flagships. Gaming phone brands also launched new products. Xiaomi's foldable phone was also launched. Which new phones are wor...[Details]
Soft-start thyristor is a power electronic device used to control the start and operation of the motor. It has the advantages of smooth start, high operating efficiency and convenient control. In p...[Details]
GD32 MCU
京公网安备 11010802033920号
EEWORLD
