-
0 Introduction
With the development of infrared technology, infrared communication has become an increasingly popular wireless communication method. Infrared communication uses infrared ra...[Details]
-
Introduction
In many application systems, in order to apply the excellent digital signal processing capabilities of DSP, we must first digitize the analog signal (A/D conversion), then perform corr...[Details]
-
introduction
Nowadays, multimedia digital products are developing rapidly, and various audio and video functions are constantly enhanced, which makes the system's requirements for the performa...[Details]
-
Most of the current AC frequency conversion technologies use voltage-type PMW control and use a feedback rectifier bridge connected in parallel to a three-phase inverter bridge to feedback reactive...[Details]
-
The Synopsys 2019 Cloud Security Report covers the most common cloud security trends in 2019, including cloud security concerns, cloud compliance challenges, and barriers to cloud deployment. As en...[Details]
-
After investigation, many new Huawei models have been connected to the network by the Ministry of Industry and Information Technology. Among them, model TET-AN00/TET-AN10 is said to correspond...[Details]
-
STM32 microcontrollers generally have at least 3 serial ports and at most 5 serial ports, but for my project, 5 hardware serial ports are not enough. As for the reason why it is not enough, well, i...[Details]
-
Fuel cells are a new type of chemical battery. Hydrogen, oxygen, methane, etc. can all be its raw materials. It has the advantages of high energy conversion rate, no pollution, saving metal resources,...[Details]
-
Power inductors are widely used in electronic circuits, and their quality varies greatly. Here we provide a simple test method to test the inductor saturation current and inductance value. This provi...[Details]
-
Denso will invest in TSMC's first semiconductor plant in Japan. The goal is to secure stable procurement of cutting-edge semiconductors with a circuit line width of about 10 to 20 nanometers in Japan...[Details]
-
LVDS low voltage differential signaling technology is a revolutionary high-performance framework for multi-point communication in data communications, telecommunications, ISP and storage products. ...[Details]
-
1 Introduction
The optical fiber repeater station is mainly composed of an optical near-end unit, an optical fiber, and an optical remote unit. Both the optical near-end unit and the optical re...[Details]
-
introduction
Flash memory, also known as flash memory, is a new type of semiconductor non-volatile memory that gradually developed in the late 1980s. It has the characteristics of both RAM and ROM,...[Details]
-
Before the peak of electricity consumption this year, Sichuan has added a new clean energy consumption channel. On June 29, the 500 kV Shuzhou-Danjing No. 3 transmission and transformation project ...[Details]
-
1. Differences in structure The pixels of the passive drive matrix are composed of a simple substrate with a cathode and an anode. The intersection of the anode and the cathode can emit light, and t...[Details]