Parallel - Fundamental Quartz Crystal, 12MHz Nom, SMD, 4 PIN
ABM82-12.000MHZ-6-Y-T Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
7252643914
package instruction
SMD, 4 PIN
Reach Compliance Code
compliant
Country Of Origin
Mainland China
YTEOL
7.23
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.003%
frequency tolerance
50 ppm
JESD-609 code
e4
load capacitance
6 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
12 MHz
Maximum operating temperature
60 °C
Minimum operating temperature
-10 °C
physical size
3.2mm X 2.5mm X 0.6mm
Series resistance
120 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM82-12.000MHZ-6-Y-T Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
It has been several months since I got the Pingtou Ge RVB2601 . Of course, not to mention any hardware damage that may have occurred during this period, the one I have in my hand now, at least the dis...
The following figure shows a typical thyristor drive circuit. In this circuit, does the thyristor work in the third quadrant? What is the trigger current? (How to calculate it)...
Controller Area Network (CAN) is an important part of modern automobile network communication and control system. "Principles, Design and Application of Automobile CAN Bus System" comprehensively and ...
[i=s]This post was last edited by justd0 on 2020-9-2 22:54[/i]The ESP32-S2-Kaluga-1 development kit has a lot of media and comes with an external speaker.
The touch_audio routine is burned into the bo...
1. When do you need to use a logic analyzer?
The logic analyzer is recognized as the most outstanding tool in the process of digital design verification and debugging. It can verify whether the di...[Details]
Radar level meters are widely used in environmental protection, electric power, petroleum, chemical industry, steel and other industries. This is inseparable from the fact that radar waves are not ...[Details]
Motor rated operating state
When the motor is running, if all physical quantities are the same as its rated value, it is called the rated operating state. When working in the rated operating s...[Details]
introduction
Wind and solar energy in nature are characterized by abundant resources and wide distribution. At the same time, wind power generation and solar photovoltaic power generation are ...[Details]
I searched for information on the Internet for a long time, but there was no direct source code to drive a two-phase four-wire stepper motor. I wrote some basic code, and with the L298N module, it ca...[Details]
On the evening of September 15, Jiemei Technology released a convertible bond issuance plan. The company plans to issue no more than 600 million yuan, which will be used for the production of 36,000 ...[Details]
The internal structure of the ADC of the PIC16F877 microcontroller is shown in Figure 1. The difference between the 40-pin package chip and the 28-pin package chip is mainly the number of analog ...[Details]
I. Introduction The external crystal oscillator on the JZ2440 development board is 12MHz. When the development board is powered on, the system clock of the S3C2440 is 12MHz. However, the maximum syst...[Details]
span style="font-size:18px;" /* *info:buzzer *author:chenlu *date:2014.11.20 */ //input the head file so that the program can work normally //iom16v---know the register //macros---know the BIT(x) #...[Details]
0 Introduction
Capacitive sensors are a type of sensor that converts the measured non-electrical quantity changes into capacitance changes. Due to its advantages of high sensitivity, low power ...[Details]
After buying the speakers they like, many friends will feel that the effect is not as good as what they heard in the store's audition room, and even feel like they have changed a set of speakers. Don'...[Details]
Over the past year, more and more automakers have chosen to use lidar as one of their main sensors and accelerated the installation of lidar in vehicles in order to seize the strategic commanding hei...[Details]
Diabetes affects about 8.5% of the world's population and is now the eighth leading cause of death. The World Health Organization estimates that diabetes will rise to seventh place by 2030. This ...[Details]
During the operation of the CPU, it is often necessary to interact with peripherals. The interaction methods include "polling method" and "interrupt method".
Polling method:
The...[Details]