SR2-030-H135/06-95E

Editor's note: Those who know the constant and understand the changes will win, and those who keep the right and innovate will advance. Since the beginning of this year, Zaozhuang City has deepened th...[Details]

The most important thing in the human-machine interface is the button. I think the best button is the button of the mobile phone, which has functions such as long press, enemy detection, and burst....[Details]

The noise from the power supply can be measured using a commercial EMI current probe, which is used to observe the noise from the switching device in Figure 7. In this example, the switching device...[Details]

In the image measurement industry, people often talk about two-dimensional, three-dimensional, or 2D, 3D measurement, and some say 2.5-dimensional or 2.5D measurement, which all refer to the spatial d...[Details]

　　1. Function The 　　 　　16×16 dot matrix display learning board is shown in the figure below. The brightness of each point of the LED display is uniform and sufficient. It can display graphics and tex...[Details]

From autonomous mobile robots to self-driving cars and industrial automation, the demand for fast and accurate video analysis at the edge of the network is rising. According to foreign media reports,...[Details]

　　Pointer multimeter measures AC current using the rectification and shunt method. 　　There are two ways of shunting: shunting first and then rectifying, or rectifying first and then shunting. 　　1. Th...[Details]

In the summer of 1987, when the then deputy director of the State Economic Commission visited Shanghai Volkswagen, he issued a warning in front of Chinese and German personnel: "If the proportion of ...[Details]

Integrating powertrain systems into compact mechanical enclosures enables more practical and efficient electric vehicles (EVs) As Texas Instruments (TI) advances electric vehicle powertrain archit...[Details]

1. Commonly used detection methods Commonly used detection methods for integrated circuits include online measurement method, off-line measurement method and substitution method. 1. O...[Details]

introduction With the advent of the Internet and the post-PC era, embedded systems are increasingly being used, and embedded products are everywhere in people's lives. Today, the annual in...[Details]

Working principle of carbon sulfur analyzer: after the carrier gas (oxygen) is purified, it is introduced into the combustion furnace (resistance furnace or high frequency furnace). The non-ferrous me...[Details]

LED is called the fourth generation lighting source or green light source. It has the characteristics of energy saving, environmental protection, long life and small size. It can be widely us...[Details]

interrupt indicates the interrupt priority, and using indicates the working register group used. interrupt x using y        The xx value after interrupt is the interrupt number, that is, which interr...[Details]

A soft starter is an electrical device used to start a motor. It can effectively reduce the current shock when the motor starts, extend the service life of the motor, and improve the stability ...[Details]