1. DC superposition characteristics of chip ferrite beads
Chip ferrite beads are an inductor that uses ferrite. Therefore, when a large current passes through, special attention needs to be paid to pe...
"Introduction to Electromagnetic Compatibility" comprehensively and systematically describes the basic principles and design methods of electromagnetic compatibility. The book is divided into two part...
1. Selection of pull-up resistor for MCUYou can see that when the resistor R1=10k in the reset circuit, RST is high level, and when R1=50, RST is low level. It is obvious that when R1=10k, it is wrong...
The Ethernet to CAN module enables devices on the Ethernet bus to send information to devices on the CAN bus and work together. It is a commonly used CAN data converter. So, how should it be connec...[Details]
On November 2, the Jiangxi Think Tank Summit and the National Academy of Sciences Industrial Technology and High-end Talent Introduction to Jiangxi event, jointly organized by the Jiangxi Provi...[Details]
Since the NandFlash controllers of s3c2410 and s3c2440 are different, the s3c2440_nand.c file cannot be directly applied and needs to be modified appropriately. The main modification is the related...[Details]
In the previous article, we talked about the continuous sampling mode of STM8 ADC. In order to improve the sampling accuracy and rate, the STM8 microcontroller also provides a continuous sampling mod...[Details]
FTS-300 fiber optic cable tester is an optical tool test instrument that integrates OTDR, fiber optic cable search, red light source, light source, optical power meter and fiber end face detection ...[Details]
The main functional test items of Keysight's power supply include: output ripple and noise, overvoltage protection cut-off time, power on and off delay, power up and down programming time, transient ...[Details]
The on-chip hardware structure of the AT89S51 microcontroller is shown in Figure 2-1. It integrates the basic functional components necessary for control applications on an integrated circuit chip wi...[Details]
The Ministry of Industry and Information Technology organized the preparation and recently issued the "Guidelines for the Construction of the National Automotive Chip Standard System", aiming to furt...[Details]
eSOL and RTI Collaborate to Support Rapid Development in the Automotive and Industrial Automation Markets RTI Connext DDS and eSOL RTOS High-Performance Dream Combination Powers Multicore Applicati...[Details]
Recently, the European Union's "Horizon-Europe" plan announced the launch of an ambitious multidisciplinary project-6G-EWOC. The project focuses on developing 6G communication technology to support a...[Details]
Shanghai, China, April 25, 2024
Universal Robots has been working tirelessly to automate global enterprises and accelerate its vision of "automation for anyone, anywhere."
U...[Details]
If you like singing, do you remember how long it has been since you went to KTV? Have you been to the many karaoke rooms nowadays? Do you always sing karaoke on the APP, but always feel that somethin...[Details]
With the development of 4.0 and new productivity, the importance of applications is increasing. Robot automation has not only greatly improved efficiency and quality, but also alleviated the pr...[Details]
On March 29, Guangzhou held a concentrated start-up and completion signing ceremony for major projects in 2022. A total of 242 projects were started, 148 projects were completed, and 148 projects wer...[Details]
In 2020, Apple released a new iPad Pro, a year and a half after the last product update, but the 2020 iPad Pro has not changed much. Although it is equipped with a new camera module, including LiDAR ...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
