OptiTip
®
Assembly
Features and Benefits
OptiTip
®
MT preterminated cabling solution
Up to 50 percent faster per system deployment
Factory-tested
Quick, reliable installation
Flexibility for various network designs
Indoor and outdoor application
OptiTip MT Connector
Compatible with FlexNAP™ System, MDU terminals,
FDT stubbed terminals
Robust design keeps connector intact during instal-
lation
Integral pulling eye/connector cap designed for 100 lb
maximum pulling tension
The OptiTip
®
assembly is designed for use in outs-
ide plant fiber access networks with FlexNAP and
OptiSheath
®
MDU and Fiber Distribution terminals. This
innovative cable assembly solution provides enhanced
design flexibility, increased deployment speed and re-
duced installation cost.
The OptiTip
®
connector is the key enabler for quick
connect of up to 12 fibers at a time. The connector is
based on the field proven MTP
®
connector technology
encapsulated in a hardened package suitable for use in
any environment. A male (pinned) version and a female
(non-pinned) version are easily joined to make a water-
tight terminal or in-line connection. Factory installation
and testing ensures reliable, low optical loss on all fibers.
OptiTip assemblies are available with SST-Drop™
Outdoor Cable or FREEDM
®
Flat Drop Indoor/Outdoor
LSZH cable which allows for easy migration of indo-
or and outdoor applications. The OptiTip Asembly is
available with either pinned or non-pinned OptiTip MT
Connectors to match your network needs.
Standards
Design and Test Criteria
Telcordia GR-3152 RUS
OptiTip Interconnect Harness Assembly
| Photo CCA225
Family Spec Sheet 0271_NAFTA_AEN
Page 1 | Revision date 2014-07-07
OptiTip MT Connector
| Photo LAN1000
OptiTip
®
Assembly
Specifications
OptiTip
®
MT Connectors
Operation
Length
Maximum Outer Diameter
Mateability
Qualification
Reflectance
Tensile Strength
Durability
Insertion Loss, Maximum
Insertion Loss
-40 °C to 70 °C (-40° to +158°F)
3.47-in female, tip to end of boot (4.07-in with dust cap installed)
3.29-in male, tip to end of boot (4.23-in with dust cap installed)
3.29-in male, tip to end of boot (4.23-in with dust cap installed)
0.7 in minimum recommended duct size is 1.25-in
Pinned alignment, male-to-female connector or female connector to male adapter
EIA/TIA 568-B.3,GR-3152, IP 69K and IP 68
Multimode 50 μm OM3: ≤ -20 dB; Single-mode OS2: ≤ -65 dB
100 lb when factory installed on SST-Drop™ or FREEDM
®
Flat-Drop Cable
< 0.3 dB change, 200 rematings, FOTP-21
0.65 dB maximum per fiber,
0.35 dB typical
* Full specifications for environmental hardiness are available upon request: Gen. Spec doc. PGS115(108)
LC, SC and ST
®
Compatible Connectors
Operation
Intermateability
Qualification
Reflectance
Durability
Tensile Strength
Insertion Loss, Maximum
-40 °C to 70 °C (-40° to +158°F)
TIA/EIA-568-B.3,
FOCIS - TIA/EIA-604-10 (LC), TIA/EIA-604-3 (SC), TIA/EIA-604-2 (ST Compatible)
EIA/TIA 568-B.3
Multimode 50 μm OM3: ≤ -20 dB; Single-mode OS2: ≤ -55 dB
< 0.2 dB change, 500 rematings, FOTP-21
≤ 0.2 dB dB change, 15 lb FOTP-6
0.5 dB maximum per fiber, 0.2 dB typical
SST-Drop™Outdoor Cable
Installation
Operation
Qualification
Weight
Outside Diameter
Tensile Strength
Durability
Compressive Loading
-22 °F to 158 °F
-40 °F to 158 °F (-40° to +70°C)
GR-20, EIA/TIA 568-B.3, RDUP listed
20 lb,1,000 ft (30 kg/km)
0.32 in
300 lb (1350 N)
< 0.3 dB change, 200 rematings, FOTP-21
125 lb/in (220 N/cm)
* Full specifications for environmental hardiness are available upon request: Gen. Spec doc. PGS115(108)
Family Spec Sheet 0271_NAFTA_AEN
Page 2 | Revision date 2014-07-07
OptiTip
®
Assembly
SST-Drop™Outdoor Cable
Insertion Loss, Maximum
Insertion Loss
0.65 dB maximum per fiber,
0.35 dB typical
* Full specifications for environmental hardiness are available upon request: Gen. Spec doc. PGS115(108)
FREEDM
®
LSZH™ Flat-Drop Indoor/Outdoor Cable
Installation
Operation
Qualification
Weight
Outside Diameter
Tensile Strength
Durability
Compressive Loading
Insertion Loss, Maximum
Insertion Loss
-22 °F to 158 °F
-40 °F to 158 °F (-40° to +70°C)
GR-20, EIA/TIA 568-B.3, RDUP listed
20 lb,1,000 ft (30 kg/km)
0.32 in
300 lb (1350 N)
< 0.3 dB change, 200 rematings, FOTP-21
125 lb/in (220 N/cm)
0.65 dB maximum per fiber,
0.35 dB typical
* Full specifications for environmental hardiness are available upon request: Gen. Spec doc. PGS115(108)
OptiTip
®
Direct Trunks
The OptiTip
®
Direct Trunk is an outdoor or indoor/out-
door cable factory terminated with a female OptiTip MT
Connector. Each connector is protected with a sealed
dust cap that has an integral pulling eye.
OptiTip Direct Trunk
OptiTip
®
Extender Trunks
The OptiTip
®
Extender Trunk is an outdoor or indoor/out-
door cable factory terminated with a female OptiTip MT
Connector on one end and a male OptiTip Connector on
the other end. Each connector is protected with a sealed
dust cap. The female dust cap has an integral pulling
eye.
OptiTip Extender Trunk
Family Spec Sheet 0271_NAFTA_AEN
Page 3 | Revision date 2014-07-07
OptiTip
®
Assembly
OptiTip
®
Harness Assembly
The OptiTip
®
Harness Assembly is an outdoor or indoor/
outdoor cable factory terminated with a male OptiTip MT
Connector on one end and a furcation and breakout to
LC, SC or ST
®
Compatible single-fiber connectors, or an
MTP
®
Multifiber Connector, on the other end. Single-fiber
connectors are terminated on 24 in long, 2.0 mm ja-
cketed furcation legs. The MTP Connector is terminated
on a 24 in long, 2.9 mm round furcation leg.
OptiTip Harness Assembly
Ordering Information
1) Minimum length is 10 ft (3 m). All other lengths must be ordered in 10 or 25 ft increments or 5 m.
2) For lengths greater than 1000 ft/m, contact Customer Care.
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks.
Corning Optical Communications is ISO 9001 certified. © 2014 Corning Optical Communications. All rights reserved.
Family Spec Sheet 0271_NAFTA_AEN
Page 4 | Revision date 2014-07-07
京公网安备 11010802033920号
EEWORLD
