Today, I compiled a Mitsubishi PLC sequential control instruction according to the PLC tutorial. Intention: After power on, S1 segment works for 10 seconds and outputs Y0, then switches to S2 segment ...
This lecture will introduce the new generation of solutions for TI's SimpleLink wireless processor family, which includes a new version with upgraded functions and cost optimization based on TI's exis...
LT3514 step-down followed by optocoupler
There is a project like this - after the DC24V is stepped down by LT3514 , it becomes DC 3.3V/5V/10V , and then each passes through an optocoupler to become an...
According to the following schematic diagram, the microphone preamplifier circuit is designed. When the microphone is not connected, the pins 6 and 1 of the OPA2604AU have a sinusoidal periodic signal...
I have ported RTX5+CycloneTCP to the STM32746G_Disc development board. Currently using http client, I need to use the get method to request: https://api.imjad.cn/cloudmusic/?keywords=songid=210042sear...