Features .......................................................................................................................................................................................1
Ordering Information .....................................................................................................................................................................2
Dimensions and Patterns ― 3.2 x 2.5 mm .................................................................................................................................14
Dimensions and Patterns ― 5.0 x 3.2 mm .................................................................................................................................14
Dimensions and Patterns ― 7.0 x 5.0 mm .................................................................................................................................15
Additional Information .................................................................................................................................................................16
Revision History ..........................................................................................................................................................................17
Rev 1.06
Page 3 of 17
www.sitime.com
SiT3373
220 MHz to 725 MHz Ultra-low Jitter Differential VCXO
Electrical Characteristics
Table 2. Electrical Characteristics – Common to LVPECL, LVDS and HCSL
All Min and Max limits in the Electrical Characteristics tables are specified over temperature and rated operating voltage with standard
output termination shown in the termination diagrams. Typical values are at 25°C and nominal supply voltage.
Parameter
Output Frequency Range
Frequency Stability
Symbol
f
F_stab
Min.
220.000001
-15
-25
-35
-50
Operating Temperature Range
T_use
-20
-40
-40
-40
Supply Voltage
Vdd
2.97
2.70
2.52
2.25
Pull Range
Upper Control Voltage
Lower Control Voltage
Control Voltage Input Impedance
Control Voltage Input Bandwidth
Pull Range Linearity
Frequency Change Polarity
Input Voltage High
Input Voltage Low
Input Pull-up Impedance
Duty Cycle
Start-up Time
OE Enable/Disable Time
PR
VC_U
VC_L
VC_z
V_c
Lin
–
VIH
VIL
Z_in
DC
T_start
T_oe
70%
–
–
45
–
–
Typ.
–
–
–
–
–
–
–
–
–
3.30
3.00
2.80
2.50
Max.
725
+15
+25
+35
+50
+70
+85
+95
+105
Supply Voltage
3.63
3.30
3.08
2.75
V
V
V
V
ppm
Vdd
Vdd
MΩ
kHz
%
–
–
30%
-
55
3.0
3.8
Vdd
Vdd
kΩ
%
ms
µs
Measured from the time Vdd reaches its rated minimum value.
f = 322.265625 MHz. Measured from the time OE pin reaches
rated VIH and VIL to the time clock pins reach 90% of swing
and high-Z. See
Figure 9
and
Figure 10
Pin 2, OE
Pin 2, OE
Pin 2, OE logic high or logic low
Contact SiTime
for other input bandwidth options
See the APR (Absolute Pull Range)
Table 11.
Contact SiTime
for custom pull range options
Voltage at which maximum frequency deviation is guaranteed
Voltage at which minimum frequency deviation is guaranteed
Unit
MHz
ppm
ppm
ppm
ppm
°C
°C
°C
°C
Extended Industrial
Extended Commercial
Industrial
Condition
Accurate to 6 decimal places
Inclusive of initial tolerance, operating temperature, rated
power supply voltage, load variations, and first year aging
at 25°C, with VIN voltage at Vdd/2.
±15
ppm is only guaranteed for pull range up to
±100
ppm.
Frequency Range
Frequency Stability
Temperature Range
Voltage Control Characteristics
±25, ±50, ±80, ±100, ±150, ±200,
±400, ±800, ±1600, ±3200
90%
–
–
–
–
–
–
10
10
–
Positive Slope
–
–
100
–
–
–
–
10%
–
–
1.0
Input Characteristics
Output Characteristics
Startup and OE Timing
Rev 1.06
Page 4 of 17
www.sitime.com
SiT3373
220 MHz to 725 MHz Ultra-low Jitter Differential VCXO
Table 3. Electrical Characteristics – LVPECL Specific
Parameter
Current Consumption
OE Disable Supply Current
Output Disable Leakage Current
Maximum Output Current
Output High Voltage
Output Low Voltage
Output Differential Voltage Swing
Rise/Fall Time
RMS Period Jitter
[4]
RMS Phase Jitter (random)
Symbol
Idd
I_OE
I_leak
I_driver
VOH
VOL
V_Swing
Tr, Tf
T_jitt
T_phj
–
0.220
0.270
ps
Min.
–
–
–
–
Vdd-1.15
Vdd-1.9
1.2
–
–
Typ.
–
–
0.15
–
–
–
1.6
225
1.0
Max.
97
63
–
32
Vdd-0.7
Vdd-1.5
2.0
290
1.6
Unit
mA
mA
A
mA
V
V
V
ps
ps
Condition
Excluding Load Termination Current, Vdd = 3.3 V or 2.5 V
OE = Low
OE = Low
Maximum average current drawn from OUT+ or OUT-
See
Figure 5
See
Figure 5
See
Figure 6
20% to 80%, see
Figure 6
f = 322.265625 MHz, Vdd = 3.3 V or 2.5 V
f = 322.265625 MHz, Integration bandwidth = 12 kHz to 20 MHz,
all Vdd levels, includes spurs, pull range =
±100
ppm.
Temperature ranges -20 to 70°C and -40 to 85°C
f = 322.265625 MHz, Integration bandwidth = 12 kHz to 20 MHz,
all Vdd levels, includes spurs, pull range =
±100
ppm.
Temperature ranges -40 to 95°C and -40 to 105°C
f = 156.25 or 322.265625 MHz, IEEE802.3-2005 10 GbE jitter
mask integration bandwidth = 1.875 MHz to 20 MHz,
all Vdd levels
f = 322.265625 MHz, Vdd = 3.3 V or 2.5 V
f = 322.265625 MHz, Integration bandwidth = 12 kHz to 20 MHz,
all Vdd levels, includes spurs, pull range =
±100
ppm.
Temperature ranges -20 to 70°C and -40 to 85°C
f = 322.265625 MHz, Integration bandwidth = 12 kHz to 20 MHz,
all Vdd levels, includes spurs, pull range =
±100
ppm.
Temperature ranges -40 to 95°C and -40 to 105°C
f = 322.265625 MHz, IEEE802.3-2005 10 GbE jitter mask
integration bandwidth = 1.875 MHz to 20 MHz, all Vdd levels
China's integrated circuit industry has experienced several ups and downs since its inception in 1965. Although it has gone through 37 years, it is still in its early stages in terms of scale and tech...
The pressure level gauge is a pressure sensor for measuring the liquid level. The pressure level gauge (liquid level transmitter) is based on the principle that the static pressure of the measured liq...
The operational amplifiers launched by TI can be divided into three categories: Bipolar, BiFET and CMOS. Understanding the main characteristics of each type of device can help users choose the most su...
I am not well educated. When I was looking through the literature, I saw that the BAW resonator I was going to make could be used for phase shifting function, but I didn't quite understand what phase ...
Part 1_Timer 1. Introduction of timer The timer of the 51 microcontroller is an internal resource of the microcontroller, and the connection and operation of its circuit are completed inside the micr...[Details]
In recent days, there have been many news about electromagnetic touch screens. It shows that Tongfang Technology acquired E-Book for its original handwriting digital writing technology, and then ...[Details]
introduction HDMI 2.1 is the latest HDMI standard released by HDMI. This standard has a 300% increase in video transmission speed, a 300% increase in compression capability, and a video bandwidth ...[Details]
August 30, 2022, Shenzhen, China -
At the 2022 OPPO Developer Conference (ODC22), the new generation of ColorOS 13 operating system and the "Pantanal" intelligent cross-end system were official...[Details]
This figure shows a PWM generation circuit that uses a linear potentiometer (or linear Hall element) on a game controller or a joystick to control two chassis drive motors. J1 is the socket o...[Details]
Introduction With the concept of Internet of Things and the development of related technologies, networked measurement and control has become an inevitable trend in the development of measure...[Details]
1 Functional Overview
The bit processing unit (BMU) is mainly composed of instruction fetch circuit, shift data processing circuit, shift selection processing circuit, barrel shift circuit an...[Details]
When the user application is running, there may be special requirements, which require the implementation of a soft reset of the MCU system (one of the hot restarts). Since the traditional MCU does...[Details]
#ifndef _KPWM_H_ #define _KPWM_H_ /*************avr frequency duty cycle adjustable waveform output sub-function**************/ ///Formal parameter: Fclk value sets the frequency (in k) Range: 1K to ...[Details]
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
In recent years, most Android phones have NFC function, and users can recharge their bus cards by just tapping the NFC card, which is really convenient. This also makes many Apple users envious. It i...[Details]
0 Introduction With the rapid development of the information age, information science and technology has become a powerful driving force for the development of the international community and world e...[Details]
Due to limited bandwidth resources, huge video signal data volume, and real-time issues, the development of the security monitoring industry has been restricted to a certain extent. Even with the sub...[Details]
On October 14, the Yunnan Provincial Development and Reform Commission and the Yunnan Provincial Energy Bureau issued the "Yunnan Province 2024 Second Batch of New Energy Project Development and Const...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
