FG*: Straight plug, cable collet and nut for fitting a bend relief
1 key (alpha=0, plug: male contacts, receptacle: female contacts)
Brass (chrome plated) shell and collet nut, nickel plated brass latch sleeve and mid pieces
D52: 4.3 - 5.2 mm
Z : Nut for fitting a bend relief
29.81 g
Performance
Configuration
Insulator
Rated Current
2B.312 : 12 Low Voltage
L: PEEK (UL 94 / V-0/3.2, depends on material thickness)
7 Amps
Specifications
Contact Type: Solder
Max. Matings: 5000
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
1/3
Contact Dia.: 0.7 mm (0.028in)
Bucket Dia.: 0.8 mm (0.031in)
Max. Stranded Conductor: 0.34 mm^2 (AWG 22)
Max. Conductor: 0.34 mm^2 (AWG 22)
R (max): 6.1 mOhm
Vtest (contact-shell): 1350 V (AC), 1910 V (DC)
Vtest (contact-contact): 1250 V (AC), 1770 V (DC)
Others
Temp (min / max): -55°C / +250°C
Humidity (max): <=95% [at 60 deg C /140 F]
Vibration: 15 g [10 Hz - 2000 Hz]
Shock Resistance: 100 g [ 6 ms]
Salt Spray Corrosion: >1000 hr
Climatical Category: 50/175/21
Shielding (min): 75 dB (10 MHz)
Shielding (min): 40 dB (1 GHz)
IP Rating: 50
DRAWINGS
Draws
Dimensions
A
mm.
in.
15
0,59
L
49
1,93
M
37
1,46
S1
13
0,51
S2
12
0,47
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
using LEMO components.
2/3
RECOMMENDED BY LEMO
Tools
Spanner wrench: MTZ.2B.220.120
Caps: BFG.2B.100.PCSG
Cables
012 050
PVC
Black
LEMO products and services are provided “as is”. LEMO makes no warranties or representations with regard to LEMO product & services or use of
them, express, implied or statutory, including for accuracy, completeness, or security. The user is fully responsible for his products and applications
I would like to thank EEWorld for providing the opportunity to review it again, and I would also like to sincerely thank DFRobot for being able to review the Erha Image Recognition Artificial Intellig...
[i=s]This post was last edited by 1nnocent on 2022-7-14 22:23[/i]I have been learning about Xilinx's FPGA development board recently. I happened to see that EE had an FPGA development board review, so...
I am not very good at reading ST documents.What is the IIC address of the LIS25BA bone vibration sensor? The slave address is 001100yx. Is the address 00110000? Or something else? What does yx mean?...
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
