85°C ± 2°C, 85%±5%RH, 1000 hours; 1.5 hr ON, 0.5 hr OFF cycle
85°C ± 2°C, 3000 hours, 1.5 hr ON, 0.5 hr OFF cycle
+155°C, 1000 hours
* Depends on resistance value, please contact KOA Speer for details.
Precautions for Use
• The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts
absorb on the top tapes to cause a failure in the mounting and the parts are destructed by static electricity (1J, 2A, 2B, 2E: 1kV and more, 1E: 0.5kV and more at Human
Body Model 100pF, 1.5kΩ) to change the resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged
on the tapes. Similarly, care should be given not to apply the excessive static electricity when mounting on the boards.
• Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc.
The flux may contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na＋), chlorine (Cl−) etc. Therefore these
kinds of ionic substances may induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since
lead free solder contains ionic substances. Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.
●
The upper electrodes could be peeled off when a heat-resistant masking tape is attached to the mounted chip resistors and then detached from them. It is confirmed that
the adhesiveness gets stronger due to the exposure to heat under mounting. Accordingly, we recommend the use of masking tape be refrained. If the use of heat-resistant
masking tape is unavoidable, please make sure that the adhesives on the tape do not directly come in contact with the product.
●
When high-pressure shower cleaning is implemented, there is a possibility of exfoliation of the top electrodes caused by the water pressure stress so please avoid
the implementation.
●
If the implementation is unavoidable, then please evaluate the products beforehand.
For Surface Temperature Rise Graph see Environmental Applications. Additional environmental applications can also be found at www.koaspeer.com
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
11/06/18
28
KOA Speer Electronics, Inc.
• 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
First, consider optimizing the system structure, such as minimizing unnecessary movement of data to be processed, and optimizing the system structure based on the storage capacity of your DSP chip and...
HTTP request process:
Enter the target website, send a GET request or POST request through http, find the corresponding function through the code, and return relevant data.
What are GET and POST reque...
In the MSP430 series of microcontrollers, the hardware multiplier is a peripheral module, not part of the CPU core; so its activity has nothing to do with the activity of the CPU, and its registers ar...
ThinkPad notebooks have always been favored by enterprises and individual users. In addition to their good stability, durability and comfort, some personalized hardware design and matching software ar...
[i=s]This post was last edited by cactusW on 2019-9-6 09:07[/i]1. Compiler CSPlus_CACX_Package_V40300, hardware UPD78F0888A, UPD70F3374
2. Use peripherals GPIO, IIC, USART, CAN, Time
3. Use the code g...
1 Introduction
In the design of intelligent instruments, it is usually necessary to display the measurement and control information. Due to the power consumption, volume and other conditions of...[Details]
The automotive battery power line is prone to transients when running the system. Typical protections required include overvoltage, overload, reverse polarity, and jump starting. During the life cy...[Details]
(Image source: Lumotive official website) According to foreign media reports, Lumotive, a startup company in the field of LiDAR systems for autonomous vehicles, and Himax Display, Inc., a subsid...[Details]
There are usually several ways to exchange information between the microcontroller CPU and external devices: unconditional transmission, query transmission and interrupt transmission. We use the inte...[Details]
MediaTek will release its world's first 5G system-on-chip (SoC) on the afternoon of the 26th. However, it had already announced the previous evening that it would work with Intel to introduce the lat...[Details]
On September 24, Lexin Technology surged 12.90% in early trading, with each share closing at 188.55 yuan, and a total market value of 15.08 billion yuan. It is understood that last night, Espressif S...[Details]
1 Classification of switching power supplies
Switching power supplies are divided into two types: isolated and non-isolated. Here we mainly talk about the topology of isolated switching power suppl...[Details]
The original intention of developing new energy plug-in hybrid technology is to enable the car to operate in both oil and electricity modes, and to run farther, have longer battery life, and consum...[Details]
0 Introduction The automobile black box is also called the automobile driving status recording system, which is mainly composed of an automobile driving status recorder, a handheld code reader and...[Details]
Recently, Zhixiang Optoelectronics Technology Co., Ltd. (hereinafter referred to as Zhixiang Optoelectronics) completed a B round of financing of tens of millions of yuan, with Shanghai Changjiang Gu...[Details]
As a partner of the iCAN National College Students Innovation and Entrepreneurship Competition, TDK has contributed to the discovery and cultivation of a group of outstanding young talents with poten...[Details]
To test ordinary capacitors, you can usually use a digital multimeter to roughly measure the capacitance of the capacitor, and then compare the measured result with the nominal capacitance of the cap...[Details]
On June 6, Lynk & Co, which "challenged conventions", brought its press conference to the "electronic music party", perfectly presenting the "mix" of technology and art, electricity and music. Adhe...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
