-
Some time ago, OPPO announced its top flagship, the new Find X series, after the release of MediaTek Dimensity 9000. According to some previous news, the new Find X series will be named Find ...[Details]
-
Recently, the first Higher Education Science and Technology Innovation Conference was held in Qingdao, Shandong. The conference was guided by the Department of Science, Technology and Informatization...[Details]
-
CAN bus is widely used in the control field. Nowadays, most CPU chips have extended CAN interface. This article focuses on the use of CAN bus based on STM32F103E series chips.
1. Hardware Basics
...[Details]
-
ADC0809 is used to collect the voltage of the thermistor on the bridge, and the LED is driven according to the voltage change.
#include reg52.h
#define uint unsigned int
sbit a=P1^0;
sbit st=P1^1...[Details]
-
1. Use the milliampere range of the multimeter
As shown in the figure (a) above, the two head ends and one tail end are connected on the left, and the two tail ends and one head en...[Details]
-
The 2019 China Data and Storage Summit was held in Beijing. At the conference, Goke Micro released its high-security storage solution to the industry for the first time. Based on its self-designed st...[Details]
-
Today's switching power supply technology relies heavily on power semiconductor switching devices, such as MOSFET and IGBT. These devices provide fast switching speeds and can withstand irregular vol...[Details]
-
Development environment: win7 JLINK V8 JLINK driver V4.56 Burning method: 1. Double-click to open J-Flash ARM V4.56 2 、File-- open project... The dialog box that pops up is ...[Details]
-
Note the USB burning method: 1. Because the size of the uncut u-boot reaches 500K, but our built-in u-boot burning partition is not that large, we cannot use u-boot to burn u-boot, we can only use ...[Details]
-
Analog Devices Releases CodeFusion Studio™ Embedded Software Development Environment and Developer Portal to Simplify and Accelerate Development of the Intelligent Edge
CodeFusi...[Details]
-
The electronics industry has developed at an astonishing pace over the past two decades. While new technological advances have reduced device size, they have also increased the pressure on discrete co...[Details]
-
Installation requirements for magnetic float level gauge There are some details that you need to pay attention to when using the magnetic float level gauge. The main purpose is to make the magnet...[Details]
-
Are tube amplifiers useful?
There are many modern music electronic devices, such as MP3, Walkman, stereo, etc., which enrich our music world and make our life colorful. Amplifier is also a ver...[Details]
-
On June 28, according to the latest process technology roadmap announced by Samsung Foundry at the annual Samsung Foundry Forum (SFF 2023) today, the company plans to launch the 2-nanometer SF2 pro...[Details]
-
Abstract:
The infrared image acquisition is completed
based on
USB2.0
bus technology and video decoding chip
SAA7114
,
the video data stream is sent and received
by
FPGA
, and the ho...[Details]