4.6 . ARMSOC-INTERRUPT_Interrupt
This design adds a Push button to the IRQ signal of the ARM Cortex-M0 DesignStart core based on the previous design ARMSOC-7SEG.4.6.1. FPGA Hardware Design
Since this ...
FNIRSI-1013D is a cost-effective dual-channel flat panel oscilloscope launched by FNIRSI with comprehensive functions for the maintenance industry and RD industry. Although it has been sold to the pub...
1. Filtering function of capacitorThat is, the larger the frequency f, the smaller the impedance Z of the capacitor.
At low frequencies, the useful signal can pass smoothly because the impedance Z of ...
Matter has become really popular recently, so the question is, if we want to popularize the use of Matter, will we need to make a major change in our devices? Or can the firmware upgrade of ordinary d...
My program uses the HAL driver of STM32G431 to write the FLASH sector, but it always fails.
int save_config_params(CONFIG_PARAMS *params)
{uint32_tPAGEError;uint32_taddr;int i;FLASH_EraseInitTypeDef E...
During the simulation, when the IO port is plugged in and out, the level change should enter the interrupt, but it turns to the error below and keeps looping here. What is the reason and how to solve ...