-
6G research should be prepared for a rainy day
By: Ron Nersesian, Chairman, President and CEO, Keysight Technologies
Since 5G is still in the development and deploym...[Details]
-
1. Introduction Radio frequency identification (RFID) technology uses wireless radio frequency to achieve two-way data exchange and identify identity. RFID positioning makes use of this identificatio...[Details]
-
Successfully capturing signals with sufficient fidelity is a major challenge in communication system design. Stringent standards and specifications require the selection of appropriate interface to...[Details]
-
In response to recent rumors that Jia Yueting's electric car startup FF is facing restructuring and that Jia Yueting himself has resigned as CEO, FF responded to reporters that the company had alread...[Details]
-
1. What is load dump?
Load dump refers to the sudden change in power supply voltage caused by the load mutation at the moment of disconnection between the power supply and the load. In the fie...[Details]
-
SKYLAB, which is committed to providing high-quality positioning modules and wireless modules to market customers, has recently launched a number of domestic Beidou modules. In this article, SKYLAB...[Details]
-
The fact that the Mate 9 series and P10 series from four or five years ago can be upgraded to Hongmeng 2.0 is indeed beyond many people's imagination. Starting from mid-September, Huawei bega...[Details]
-
According to Bloomberg, a shortage of semiconductors is hitting automakers and tech giants. From the United States to the European Union to China, alarm bells are ringing. The semiconductor crunch ra...[Details]
-
This article focuses on the two most common battery chemistries: Li-ion and NiMH. Through this discussion, a mixed-signal universal battery charger can be designed that can charge both types of batte...[Details]
-
Resolution bandwidth (RBW), also called reference bandwidth by some, represents the bandwidth power being tested. For example, when testing the GSM2W dry discharge single carrier output at full power...[Details]
-
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
-
An oscilloscope is an electronic instrument that can directly display the waveform of voltage changes. It can not only observe the change process of electrical signals, but also measure the waveform,...[Details]
-
First, declare the task pointer because it will be used later.
//Task pointer.
volatile TASK_TCB* volatile g_pCurrentTask = NULL;
volatile TASK_TCB* volatile g_pCurrentTask1 = NULL;
...[Details]
-
The so-called full-bridge circuit is an oscillator composed of four transistors or MOS tubes.
The full-bridge circuit is not prone to leakage current, while the half-bridge circuit is prone to le...[Details]
-
0 Introduction
The circulating water system in industrial production consumes a lot of fresh water during operation. At the same time, in order to prevent scaling of industrial equipment, various che...[Details]