Specifications are limited by the circuit and resistance value.
Please contact us separately.
3 digits
●
Resistor Networks：RNX, RTX, RTY
RNX
Circuit
Code
RNX: Custom Resistor Network
RTX,RTY: SOT-23 Resistor network
●
Resistor Networks：RDA, RDB
RDA
Circuit
Code
RDA: Dual terminator network
RDB: Differential terminator network
Example
Q20
Package
Symbol
Package type symbol＋
Number of pins
Example
T
Terminal
Surface Material
T :Sn
TE
Taping
TE: Plastic
embossed
5001
Custom
Code
Q20
Package
Symbol
Same as above
(Except Q24, N14, N08)
T
Terminal
Surface Material
T:Sn
TE
Taping
TE: Plastic
embossed
471J
Nominal Resistance
& Tolerance of R1
3 digits G: ±2%
J : ±5%
511J
H
Contact us when you have control request for environmental hazardous material other than the substance specified by EU-RoHS.
Nominal Resistance
T.C.R.
& Tolerance of R2 （×10
−6
/K）
3 digits G: ±2%
E :±25
J : ±5%
C:±50
H:±100
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
■Ratings
Package
Package Symbol
Package Power Rating
Resistance Range
Max. Working Voltage
Rated Voltage
Rated Ambient Temp.
Operating Temp. Range
10Ω〜1kΩ
1.1kΩ〜
Q16
0.8W
QSOP
Q20
1.0W
Q24
1.0W
N08
0.4W
SOIC
N14
0.6W
N16
0.8W
SOT-23
S03
0.2W
Power Rating 200mW/Resistor Element
※1
Power Rating 50mW/Resistor Element
※1
100V
√￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣￣
Rated Power×Nominal Resistance Value, Rated Voltage should not exceed Max. Working Voltage.
＋70℃
−55℃〜＋125℃
※2
Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be needed. Please inquire of us about
conditions.
※1 Total power consumption of all elements should not exceed the package power rating.
※2 About operating temperature range −55℃〜＋155℃, We can provide as custom devices. Please inquire of us about it.
●Standard Resistor Networks
Circuit
Code
Circuit Schematics
（Top View）
Pin n
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
C:±50
H:±100
Resistance Range
（Ω）
E24
and Absolute Tolerance
F:±1%
G:±2%, J:±5%
100〜100k 100〜100k
51〜100k
30〜100k
n/2
51〜100k
10〜100k
Circuit
Code
Circuit Schematics
（Top View）
Pin n
R1
Number
of Pins
T.C.R.
（×10
−6
/K）
E:±25
Resistance Range(Ω) (E24)
and Resistance Tolerance
G:±2%, J :±5%
Network Resistors
Pin n
RBA
R
8, 14, 16
R
20, 24
n/2
Number of Pins : n=8,16,20,24
RDA
R2
-
R1
R2
-
16, 20
C:±50
H:±100
Pin n
R1
Pin 1
Pin n
R
Pin n
Pin 1
Pin 1
n/2
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin n
Pin
:
Number of Pins
n
n=8,16,20,24
E:±25
n
100〜100k
Pin
100〜100k
R
Pin n
R1
R2
E:±25
C:±50
H:±100
RBB
R
Pin 1
n/2
Pin
8, 14, 16
20, 24
C
R
n
C:±50
R1
R
R2
R1
Pin 1
51〜100k
30〜100k
n/2
51〜100k
10〜100k
100〜40k
2R
n/2
RDB
Pin 1
R1
Pin 1
n/2
16, 20
R2
R1
Pin
Number
1
Pins
R
2
1
n/2
: n=8,16,20,24
R
of
H:±100
E:±25
C:±50
Pin 1
R1=
150〜10k
R1: R2=
1:1〜1: 4
Pin 1
Number of Pins : n=3,SOT-23 Only
Pin 1
100〜40k
Pin n
R
R
Pin n
RTX
n/2
Pin n
R
1
R
2
R
2R
2R
R
R
2
3
SOT-23
Only
2R
2R
Number of Pins : n=8,16,20,24
RLA
R
2R
2R
R
2R
2R
n/2
14, 16
H:±100
1k〜30k
H:±100
2R
51〜40k
2R
51〜40k
2R
Pin 1
Pin 1
n/2
ber of Pins : n=8,16,20
Number of Pins : n=3,SOT-23 Only
Pin 1
n/2
■Performance
Test Items
Resistance
T.C.R.
Resistance to soldering heat
Rapid change of temperature
Moisture resistance
Endurance at 70℃
High temperature exposure
Performance Requirements
ΔR±
（％＋0.05Ω）
Limit
Typical
25℃
＋25℃/−55℃, ＋25℃/125℃
260℃±5℃, 10s±1s
−55℃
（30min.）
/＋125℃
（30min.）, 100 cycles
40℃±2℃, 90〜95%RH, 1000h
1.5h ON/0.5 h OFF cycle
70℃±2℃, 1000 h
1.5 h ON/0.5 h OFF cycle
＋125℃, 1000 h
Within specified tolerance
Within specified T.C.R.
0.1
※3
0.5
※3
Test Methods
0.05
0.05
0.05
0.05
0.10
0.5
※3
0.25
※3
0.25
※3
※3 Guaranteed value differs depending on resistance value.
■Precautions for Use
・
he resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive
T
film, abnormality in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the
components, but attention should be paid to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V and more at
100pF, 1.5kΩ) to cause a change in resistance in the conditions of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply
the excessive static electricity at the time of mounting on the boards. When designing, consideration can be taken into withstanding ESD for customized KPC
products. Please consult with us about the details.
・Hand
soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
Contact our sales representatives before you use our products for applications including automotives, medical equipment and aerospace equipment.
Malfunction or failure of the products in such applications may cause loss of human life or serious damage.
Oct. 2020
www.koaglobal.com
NETWORKS
EU
RoHS
KPC RIA
KPC RNX
Isolated Resistor Networks
Custom Resistor Networks
■Applications
・
utomotives, medical instrument, industrial machines, Measurement equipment
A
・
omputers and networks
C
・
igh precision OP amp circuit, High precision voltage divider
H
■Features
・
High precision resistor networks
Combination of different resistance is available for custom circuit.
[size=4] The Wifi module includes two working modes, AP and STA. With the support of these two modes, the wireless image transmission product can achieve the function of sending and receiving multiple...
[size=4] Noise is a common problem that is ubiquitous. Almost everyone who works with circuits has to deal with noise at some point, either by finding it and fixing it or reducing its effect on measur...
1. I have been busy recently, so I will participate in this interesting DIY activity later, but the process is still very interesting. I made an op amp evaluation board. Originally, I wanted to use th...
Rich experience in TI ADI E2V and domestic high-speed ADC/DAC front-end design, clock, 204B simulation optimization, channel loss, channel consistency, phase-amplitude consistency, and isolation impro...
Recently, a famous Weibo user revealed online that Honor forced its employees to pay for the purchase of shares. Each department had its own allocation quota. Some employees were even asked by their s...
With the development of the Internet and e-commerce, network information security issues are particularly important. Data confidentiality transformation or information encryption has become the m...[Details]
Under the latest changes, Apple hopes to launch an electric vehicle as early as 2028, about two years later than its most recent forecast, people familiar with the matter said. After Apple found that...[Details]
Intel is pushing into the lucrative data center market with new processors designed for it, but it will face stiffer competition from Nvidia Corp. and Advanced Micro Devices Inc.
The new p...[Details]
Powerful clock interrupt In microcontroller programming, setting a good clock interrupt will enable one CPU to play the role of two CPUs, greatly facilitate and simplify program preparation, and impr...[Details]
According to Jiwei.com on March 6, market research firm Counterpoint Research released its latest report showing that OPPO ranked first in domestic market share in January 2021, becoming the number o...[Details]
High-speed
railways
are a major achievement of the world's railway high-tech. With its incomparable advantages such as good safety performance, fast travel speed, low energy consumption, ...[Details]
Hello everyone, today I want to talk to you about USB. My friend next to me immediately jumped up and said, "What?! USB, such an old topic, are you serious?"
Shuige replied: . . .
...[Details]
1. PIC1 microcontroller programming (sending part) LIST P=16F877 #INCLUDE P16F876.INC CBLOCK 0X24; Reserve three bytes for display COUNT; used as a counter or register ENDC ORG 0X0000 ; program res...[Details]
On March 4, Redmi Note 9 Pro appeared on the GeekBench benchmark website. The GeekBench website shows that the Redmi Note 9 Pro is equipped with 6GB of memory, a CPU clocked at 1.8GHz, runs...[Details]
UPS (Uninterruptible power SySTem), or uninterruptible power supply, is a constant voltage and frequency uninterruptible power supply with energy storage device and inverter as the main component. ...[Details]
In 19th century Europe, the first train was far behind the horse-drawn carriage. When the clock points to the 21st century, the high-speed rail has exceeded 400 kilometers per hour, and the horses o...[Details]
Image source: NEC Energy Solutions (www.nces.com)
NEC Energy Solutions, a wholly owned subsidiary of NEC Corp (TYO:6701), announced today that it has commissioned a 2MW/2MWh...[Details]
T6963C is a liquid crystal display controller that is widely used in instruments. It provides two output modes: text and dot matrix. However, the speed of dot matrix output is much slower than that o...[Details]
Open-drain output: The output terminal is equivalent to the collector of the transistor. A pull-up resistor is required to obtain a high-level state. It is suitable for current-type driving and has...[Details]
Construction conditions: New energy power is random and volatile, which brings great risks and challenges to the safety and stability of the power system. The development of energy storage can not onl...[Details]
Wireless Connectivity
京公网安备 11010802033920号
EEWORLD
