VHA412Z43K200TB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> VHA412Z43K200TB

VHA412Z43K200TB: DescriptionFixed Resistor, Metal Foil, 0.3W, 43200ohm, 250V, 0.01% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

VHA412Z43K200TB Overview

Fixed Resistor, Metal Foil, 0.3W, 43200ohm, 250V, 0.01% +/-Tol, -.2,.2ppm/Cel,

VHA412Z43K200TB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	852038387
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e0
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	9.53 mm
Package length	15.88 mm
Package form	Axial
method of packing	Bulk
Rated power dissipation(P)	0.3 W
resistance	43200 Ω
Resistor type	FIXED RESISTOR
series	HZ(AXIAL)
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.01%
Operating Voltage	250 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

RTS755/RTS756 circuit-b

LR7 typical application circuit diagram

Inverting AC amplifier circuit composed of LM324

Human body induction alarm circuit

555 voltage monitor circuit

Phototransistor and its output characteristics

Analysis of Active Precision Detection Circuit: [size=4] The 50Hz AC sampling signal V1 is sent to the inverting input pin 6 of the active precision detector composed of pins 5, 6, and 7 of R1, R2, D1, and U. The purpose of using an active precisio...; 灞波儿奔 Analogue and Mixed Signal

PCB Problems: Hello everyone! I disassembled a power supply board produced by another company, and I was curious about the craftsmanship in one place. It was the first time I saw it. What is the green layer next to...; wzk198005 Analog electronics

Microcontroller programming always involves frequent changes of variables: [size=4][color=#000000][backcolor=white]1. If both the interrupt and the main thread need to access the same variable, the interrupt should be turned off before accessing it in the main thread, and tu...; Aguilera Microcontroller MCU

DSP28335 performs FFT Fourier transform: 1. I looked at the examples and found that there is no FFT example. Does this DSP28335 not support FFT? By the way, the C2000 series has the C2000 ware library. It is much more convenient, but I am no...; fish001 DSP and ARM Processors

Distributed capacitance of winding: All inductors, including transformers, are made of copper wire or other metal conductors wound in turns. All inductors have distributed capacitance, the only difference is the size of the distributed ...; maychang Integrated technical exchanges

What is the principle of this voltage regulator circuit? Please help analyze it.: What is the principle of this voltage regulator circuit? Please help analyze it....; Knight97538 Power technology

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components