Parallel - Fundamental Quartz Crystal, 54MHz Nom, SMD, 4 PIN
ABM81-54.000MHZ-18-N1X Parametric
Parameter Name
Attribute value
Is it Rohs certified?
conform to
Objectid
145206908872
package instruction
SMD, 4 PIN
Reach Compliance Code
unknown
Ageing
2 PPM/FIRST YEAR
Crystal/Resonator Type
PARALLEL - FUNDAMENTAL
Drive level
10 µW
frequency stability
0.002%
frequency tolerance
10 ppm
JESD-609 code
e4
load capacitance
18 pF
Installation features
SURFACE MOUNT
Nominal operating frequency
54 MHz
Maximum operating temperature
85 °C
Minimum operating temperature
-30 °C
physical size
3.2mm X 2.5mm X 0.65mm
Series resistance
35 Ω
surface mount
YES
Terminal surface
Nickel/Gold (Ni/Au)
ABM81-54.000MHZ-18-N1X Preview
CERAMIC SMD CRYSTAL
ABM8
Moisture Sensitivity Level (MSL) – This product is Hermetically Sealed and not Moisture
Sensitive - MSL = N/A: Not Applicable
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
FEATURES:
• Seam sealed package assures high reliability
• Tight tolerance and stability available
• Suitable for RoHS reflow
APPLICATIONS:
• High density applications
• Modems, communication and test equipment
• PMCIA, Wireless applications
STANDARD SPECIFICATIONS:
Parameters
Frequency Range
Operation Mode
Operating Temperature
Storage Temperature
Frequency Tolerance @+25°C
Frequency Stability over the Operating
Temperature ( ref. to +25°C)
Equivalent series resistance (R1)
Shunt capacitance (C0)
Load capacitance (CL)
Drive Level
Aging
Insulation Resistance
TABLE 1- Standard ESR
Frequency (MHz)
10.000 -11.999 (Fund)
12.000 -15.999 (Fund)
16.000 -19.999 (Fund)
20.000 - 29.999 (Fund)
-2
500
ESR( )
max
200
120
70
50
Minimum
10.000
Typical
Maximum
125.000*
Units
MHz
Notes
Contact Abracon for
available F<10MHz
10MHz - 54MHz
64MHz - 125MHz
Please contact Abracon for
available frequencies
Fundamental
3rd Overtone
(Standard Frequencies: 64, 66, 66.6666, 75,
80, 98.304, 100, 125MHz)
-10
+60
-55
+125
-50
+50
-50
See table 1 below
3.0
18.0
10
100
+2
+50
ºC
ºC
ppm
ppm
pF
pF
µW
ppm
M
(see options if other than STD)
Standard
Standard
Standard
(see options if other than STD)
(see options if other than STD)
Standard
(See options if
other than STD)
@25°C±3°C
First year
@ 100Vdc ± 15V
ESR( )
max
40
35
120
80
Frequency (MHz)
30.000 - 39.999 (Fund)
40.000 - 54.000 (Fund)
64.000 - 80.000 (3rd OT)
98.304 - 125.000 (3rd OT)
OPTIONS AND PART IDENTIFICATION: (Left blank if standard)
ABM8
Height (mm)
Blank: 0.80 max
1: 0.65±0.05
2: 0.60±0.10
Frequency in MHz
Please specify the
frequency in MHz.
e.g. 16.000MHz
Load Capacitance (pF)
Please specify CL (min
6pF) in pF or S for series
Custom ESR if
other than standard
R
: Specify a value in
(e.g.: R40)
Operating Temp.
E
Blank: -10°C ~ +60°C
E: 0°C ~ +70°C
B: -20°C ~ +70°C
C: -30°C ~ +70°C
N: -30°C ~ +85°C
D: -40°C ~ +85°C
J**: -40°C ~ +105°C
K**: -40°C ~ +125°C
** Frequency stability ±
50ppm and ± 100 ppm
-
MHz -
-
-
-
Packaging
Blank: Bulk
T: 1kpcs / reel
T2: 250pcs / reel
T3: 3kpcs / reel
Freq. Stability
Blank: ± 50 ppm
U: ± 10 ppm(*)
G: ± 15 ppm
X: ± 20 ppm
W: ± 25 ppm
Y: ± 30 ppm
H: ± 35 ppm
Q: ± 100 ppm
(*) Option E, B, and
-10°C to +60°C only.
Freq. Tolerance
Blank: ± 50 ppm
1: ± 10 ppm
7: ± 15 ppm
2: ± 20 ppm
3: ± 25 ppm
4: ± 30 ppm
LLC
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
For terms and conditions of sales, please visit:
www.abracon.com
ABRACON IS
REVISED: 07-1-20
ISO9001-2015
CERTIFIED
CERAMIC SMD CRYSTAL
ABM8
OUTLINE DRAWING:
Pb
RoHS
Compliant
3.2 x 2.5 x 0.8mm
Note:
Due to material availability, the chamfer could be located
on pin #1, 3, or 4. Be advised that the chamfer location has
no impact on the electrical performance of the device.
Table 2
Height (mm)
ABM8
0.80 max
ABM81
0.65+/-0.05
ABM82
0.60+/-0.10
Dimensions: mm
TAPE & REEL:
Option "-T"
: Tape and reel (1,000pcs/reel) : ABM8, ABM82
Tape and reel (3,000pcs/reel) : ABM81
Option "-T2" : Tape and reel (250pcspcs/reel) : ABM8
Option "-T3" : Tape and reel (3,000pcs/reel) : ABM8, ABM82 only
REFLOW PROFILE:
Zone
1
2
3
Dimensions: mm
Description
Temperature
Time
Preheat
Reflow
Peak heat
T
SMIN
~ T
SMAX
150°C ~ 180°C
T
L
230°C
T
P
260°C
±
5°C
60 ~ 120 sec.
30 ~ 40 sec.
10 sec. MAX
ATTENTION:
Abracon LLC’s products are COTS – Commercial-O -The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependent Medical applications or any application requiring high reliability
where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment,
written consent and authorization from Abracon LLC is required. Please contact Abracon LLC for more information.
Frank Xiao
The DC/DC converter control chip UC3525 has been in use for more than 20 years and is still one of the most common PWM (pulse width modular) controllers on the market. It integrates control...
[i=s]This post was last edited by Hot Ximixiu on 2021-8-6 07:16[/i]Sensor: Panteng PMS5003;Hardware connection:VCC -- 5VGND -- GNDTX -- PB11 (RX2)RX -- PB10 (TX2)Basic process1. Connect the sensor to ...
Smart home is a field that has been attracting much attention in recent years. With the continuous development of technologies such as 5G industry, cloud computing, AIoT, and big data, the market dema...
I used a 3.3V 3-pin DCDC reference source chip REF2933 before.
Now I find that it is not suitable and I need a 5V one.
Has anyone used a 5V 3-pin DCDC voltage reference chip? Can you recommend one? Th...
Advantages such as small form factor, low power consumption and fast turn-on time have led to the
widespread adoption of
high-brightness LEDs
in today's automobiles. The initial application...[Details]
On May 10, South Korean media ZDNet Korea quoted industry insiders as saying that Samsung Electronics' AI inference chip Mach-1 will soon be prototyped in the form of MPW (multi-project wafer), and...[Details]
Hyde Acoustics uses Rohde & Schwarz CMX500 to accelerate 5G NR voice service (VoNR) testing
Voice and audio analysis expert Hyde Acoustics has decided to use
Rohde & Sc...[Details]
(Based on the stm32_v5 development board) #include"stm32f10x.h" #define ON 1 #define OFF 0 void LED_GPIO_Config() { /*Define a GPIO_InitTypeDef type structure*/ GPIO_InitTypeDef GPIO_InitStruc...[Details]
Common fiber optic test instruments include optical power meters, light sources, and optical time domain reflectometers (OTDRs). When testing, jumpers are required to extend the accuracy and life of ...[Details]
1 Design Concept The automobile instrument is a window and interface for information exchange between the driver and the car, and plays a positive and important role in improving the service lif...[Details]
1. Introduction
With the continuous advancement of automobile assisted driving technology, more and more sensors and controllers are used in automobiles. Many new models are already equipped w...[Details]
Corning® Gorilla® Armor is the most scratch-resistant and optically advanced addition to the Gorilla® Glass family yet, enabling Samsung’s latest flagship smartphones to deliver unprecedented durabil...[Details]
; There are 8 LEDs connected to the P1 port of the 51 microcontroller. ;There is a push button switch K1 connected to the external interrupt 0 input pin P3.2. ;There is a push button switch K2 connec...[Details]
According to the latest news, Apple has closed the verification channel for the iOS 15.1.1 system, which means that users who have upgraded to the iOS 15.2 system can no longer downgrade to iOS 15.1....[Details]
The most reliable way to judge the quality of a high-voltage transformer is to conduct a "separate power-on" test on the high-voltage transformer. Remove the high-voltage transformer from the machine...[Details]
Some time ago, Geek Choice (WeChat: GeekChoice) wrote an article discussing the changing history of the relationship between mobile phones and computers. We believe that under the current circ...[Details]
On July 18, according to 36Kr Auto, Ideal Auto recently established an entity organization for "end-to-end autonomous driving" with a total of over 200 people. At the same time, some members of oth...[Details]
The effect is as follows: Circularly shift right and then left
#include htc.h
#ifndef _XTAL_FREQ
#define _XTAL_FREQ 4000000
#endif
const unsigned char seg_comAnode ={0x3f,0x06,0x...[Details]
LCD has rapidly become a hot spot in the display market with its inherent advantages: ultra-thin thickness, no radiation, no flicker, and has occupied a considerable market share in the large...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
